Question about 2003 Ford Crown Victoria

1 Answer

2003 Crown Victoria Police Interceptor has rear door locks not accessible for unlocking by passenger. What is the least expensive way to fix this?

Posted by on

  • 2 more comments 
  • jon clark Nov 10, 2008

    i can get in there ive got the panel off and all but i cant seem to figure out wat goes were ive got the parts

  • Anonymous Mar 18, 2014

    will unlock with switch and remote

  • Anonymous Mar 18, 2014

    all doors will unlock with switches and remote. car is a 2003 ford crown Victoria lx

  • Anonymous Mar 24, 2014

    I locked the keys into the 1993 Crown Victoria. AAA came and opened the passengers side door with a slim jim. Now the car won't start. I'm wondering if there is a kill switch (I'm pretty sure it's not an old police car.). Any suggestions about what to do? Lights, radio, door locks, and windows are all working.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Assuming you have played with the child locks on the doors you may fnid that your particular car is missing the linkage from the interior door handle to the door lock. Apart from making up a rig yourself I would suggest going to a breakers yard or possibly your local Ford dealer

Posted on Aug 14, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to install a rear door enable kit on a 2011 Police Interceptor Crown Victoria so that the rear doors can open from the inside?

there should be the rods and clips inside the door if not you must go to the junk yard for the rods and the you must take off the door panel unscrew the lock mechanism at back of the door and fit the rods into the lock and the door handle then reassemble it ?????? did you check to make sure the child safety locks are not on ??? also your car may have the dark out system activated and you have to go to the dealer for that so they can reprogram the lighting control module to get the interior lights working

Nov 10, 2016 | 2011 Ford Crown Victoria

1 Answer

Where is the fuse for a cigarette lighter in a 2003 Crown Victoria Police Interceptor?

fuse panel is below and to left of steering column by brake pedal fuse number 25 page 166 and 167 of owners manual following link is your owners manual for 03 crown vic
2003 Ford Crown Victoria Owner Manual

Aug 10, 2016 | Cars & Trucks

1 Answer

Why does my 2007 Crown Victoria Police Interceptor vibrate when I get to 40 miles an hour and then die off back to normal by the time it reaches 50

Ford Crown Victoria Questions - what would cause a whole ... > Questions > Ford > Crown Victoria
CarGuruswhat would cause a whole car vibration when going between 48 and 65 mph, even ... Asked by Dfranz Aug 29, 2013 at 11:53 AM about the 2001 Ford Crown Victoria Police Interceptor ... You have an open diff by turning one wheel the driveshaft should turn before the .... 2007 Ford Crown Victoria Police Interceptor For Sale.

Nov 03, 2015 | Cars & Trucks

1 Answer

I need fuse panel diagrams for ford crown victoria 2002 police interceptor

For check passenger compartment fuse panel, is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses.

Other details and descriptrions can find it in 2003 Ford Crown Victoria - Owners Manual (page 164 and next).

Hope helps (remember rated this).

Aug 04, 2010 | 2003 Ford Crown Victoria

6 Answers

How to make rear power windows on police interceptor operational

pull the b pillar cover off next to the driver's seat, there will be a connector with 2 red wires mounted to the b pillar right next to the seat belt retractor, find the other connector, and connect them. should operate normally.

Jan 28, 2009 | 2003 Ford Crown Victoria

2 Answers

2004 and 2001, are parts interchangeable?

Yes they are as long as the Motors are Similar.

Jan 22, 2009 | 2004 Ford Crown Victoria

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5613 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides