Question about 1999 Ford F250 Regular Cab

1 Answer

99 F250 power window will not go up

The passenger side window is stuck down. How do I determine if it is the switch or the motor?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 74 Answers

Watch batt gage see if interior light dimmes when you hold switch up no dimming of lights probablyg of lights probably stuck motor

Posted on Aug 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right side windows does not work from drivers door or pass.and rear door 2007 Silverado new body


What's with the 1994 C/K 2500 above an 2007 Silverado ? 07 on 94 frame ? New body have all the 07 electronics ?
Power Window System Controls (RPO A31/AN3/DL3)
The power window system will operate anytime the Retained Accessory Power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The driver master control switches are integrated into the DDS. When a power window switch is activated in the up or down positions the DDS supplies power and ground to the window motor control circuits to drive the window motor in the required direction. Prior to activating a power window motor the DDS will supply the control circuit with a low current bias voltage in order to determine that a short to ground condition does not exist and during window motor operation the DDS continues to monitor the motor current to verify proper window motor operation.
The DDS controls the passenger window through a GMLAN message to the PDS. When a power window switch is activated in the up or down positions the PDS supplies power and ground to the window motor control circuits to drive the window motor in the required direction. Prior to activating a power window motor the PDS will supply the control circuit with a low current bias voltage in order to determine that a short to ground condition does not exist, and during window motor operation the PDS continues to monitor the motor current to verify proper window motor operation. (Scan tool support is available for this system)
Do you know what GMLAN is ? serial data communication network
How to Diagnose Controller Area Network CAN GMLAN is general motors C.A.N
Passenger Power Window Inoperative
  1. Ignition OFF, disconnect the C1 harness connector at the PDS.
  2. Test for less than 1 ohm between the ground circuit terminal 6 and ground.
  3. ?‡'
    If greater than the specified range, test the ground circuit for an open/high resistance.

  4. Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal 2 and ground.
  5. ?‡'
    If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.

  6. Ignition OFF, reconnect the harness connector at the PDS.
  7. Ignition ON, observe the scan tool Passenger Window Switch parameters while using the passenger power window switch. The reading should change between Off/Up/Down/Express Down.
  8. ?‡'
    If the parameter does not change, replace the PDS.

  9. Ignition OFF, disconnect the harness connector at the passenger window motor.
  10. Connect a test lamp between control circuit terminal A and control circuit terminal B.
  11. Ignition ON, command the passenger window UP and DOWN by using the passenger window switch. The test lamp should illuminate when commanding the UP and DOWN states.
  12. ?‡'
    If the test lamp is always OFF during either of the commands, test for a short to ground or open/high resistance on either control circuit. If the circuits test normal, replace the PDS.


    ?‡'
    If the test lamp is always ON, test for a short to voltage on either control circuit. If the circuits test normal, replace the DDS.

  13. If all circuits test normal, test or replace the passenger window motor.

Sep 08, 2016 | 1994 Chevrolet C/K 2500

2 Answers

2000 ford f250 passanger side window wont go up


Check the wires on the driver's door between the door and the post. A break in a wire will affect the passenger side.

Apr 04, 2012 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Passenger side power window will not go up or down when weather is hot (+100 F) . Works fine once temp drops. All other windows work fine all the time.


Hello, You need to determine if this is a switch or motor problem. If you are using the Drivers' controls for the Passengers window, try using the Passengers window control on the Passengers door. If one switch works and the other does not, then replace the bad switch.

If neither works you have to check the wiring in the door at the connector to the motor for power. You need a test light or a Voltmeter and check the power going to the Window motor by using the connector plug. Then push your window switch and see if there is power. If you have power, then it only leaves the Window motor to be the problem. Jump the connector from the motor side and see if the Window motor operates.

If you are handy, the solder on the Window motor can be bad and you only need to resolder it. If you go to replace the Window motor, be aware that the right and left sides are different. The door panels have 1 or 2 hidden screws behind trim plugs on the door handle and the speaker grille.

The temperature difference can spread a crack in a piece of Solder and this is most likely why you have a problem. I hope my solution is helpful.

Sep 04, 2011 | 1999 Ford Crown Victoria

1 Answer

I have a 1994 Toyota Camry and the power window on the passenger side has gone down, under power. Then nothing would happen when I would pulled up on the switch on the driver side main switch and the also...


more than likely one of the switches are bad (down side of switch works but up side of switch dont) being as the switches are wired together if one goes bad other one won't work either take the switch out one of back doors should be same as front passenger door put rear switch in front passenger door if works then u know front door switch is bad if it doesn't then drivers door switch is bad
u replaced window regulator Did that come with motor too??? if not check to see if motor is good
there is two wires going to motor cut isolation back on wires and using some jumper wires attach one wire to positive terminal of a 12 volt battery attach other wire to negative terminal of battery window should move up or down reverse connections and window should move other way

Jan 29, 2011 | 1994 Toyota Camry

1 Answer

2003 subaru baja. rear passenger side window.


motor is probably shot for window or window switch on the door check power to the switch and whether it sends power out but if your gettin noise when you push it it may be the regulator

Jul 31, 2010 | 2003 Subaru Baja

4 Answers

Passenger side window stuck in down position


Volcompunker is on track.... if it is a stuck motor problem, before taking door apart, try this...it may work, works well on dodge caravans...

NO COST and fast PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.

7. Repeat 3-6 if necessary, but usually the first try works!

Jul 11, 2010 | 2001 Ford Expedition

2 Answers

Passenger side power window halfway down


You will need to remove your interior trim panel and check your window regulator for damage and for power going to your window motor. If your regulator is ok and you have power going to the motor then you have a bad window motor. If there is no power at the motor then you will need to check the circuit for the problem ie. blown fuses, broken wiring, bad switch. It is very commen for the motors to go bad. Good luck.

Nov 03, 2009 | 1999 Dodge Durango

3 Answers

Passenger power window does not work 2002 Silverado HD Ext Cab


REMOVE THE DOOR PANEL TO GET TO THE WINDOW MOTOR. REMOVE THE CONNECTOR ON THE MOTOR. LOOP A TEST LIGHT FROM BOTH TERMINALS. WITH THE KEY ON AND BOTH SWITCHES IN PLACE, CHECK TO OPERATION OF THE SWITCHES. IF THE LIGHT COMES ON IN BOTH DIRECTION THE WINDOW MOTOR IS BAD.

THERE IS A CIRCUIT BREAKER BUILT INTO THE WINDOW MOTOR. SOMETIME HITTING THE MOTOR WITH MAKE THE CIRCUIT BREAKER RESET BUT THE MOTOR WONT LAST LONG DOING THAT.

ALSO TRY PULLING DOWN ON THE WINDOW WHILE TRYING THE SWITCHES. THE WINDOW COULD JUST BE STUCK. THIS HAPPENED TO ME.

Jun 13, 2009 | 2002 Chevrolet Silverado 2500HD

2 Answers

Passenger Window Stuck all the way Down


Try switching the power window switch from the passenger side to the drivers side. Before you do that try with the switch on the up position, wiggle it from side to side. The contacts may be worn and by wiggling it may make contact. Other then that try to park it in side or garbage bag taped to keep rain out till you get it to the shop.
Hint, take it to a Auto window repair shop to replace the switch if it's bad or if the motor is bad. They have more experience to removing the door panels and removing the power window regulator (motor) if that needs to be replaced.
Good luck and hope this helps. 

May 30, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
1999 Ford F250 Regular Cab Logo

841 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...