Question about 1999 Chevrolet Cavalier

1 Answer

Have too remove odomert to replace bulbs for lights can you help me thx

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Take the cover off the top thats laying over the light assembly. Take and unbolt the head light assembly all turn signal / bumper lights are accessable under the headlights.

Posted on Sep 01, 2008

  • Adam Vaughn Dec 01, 2008

    Or do you mean odometer dash area. There is two bolts top part under glove box door, then you have to pull the two side covers off either side of the car and then unbolt the bolts. NExt you have to unscrew the middle vent duct on top of the dash. Then lift the dash cover off, and unbolt the bolts holding the odometer cluster.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cargo lights on 2000 C2500 are not working. Have power from switch to the harness. The bulbs are new. Brake lights work. Dome light also works. Only getting about .7 volts to cargo bulbs. Thx for your...


Did you check the voltage to the bulb connectors or from the power side of the connector to a body ground? If you checked it to the bulb connectors and get .7 volts, then the ground wire is probably bad. Checked it to the body, the the power wire is bad. If you checked it to both, the the power is deffently bad.

Oct 25, 2014 | Cars & Trucks

1 Answer

How to install evo 5 tail lights


check see tail light lens has 4 screws holding it in place.if so remove 4 screws then remove rear tail light lens then replace tail light bulbs.if you have trouble replacing tail light bulbs the auto parts store sales person will help you free of charge and help you replace bulbs.i have seen auto parts stores sales person help people replace batteries,windshield wiper blades and light bulbs in vechicle if you have trouble fixin it your self.

Feb 06, 2012 | 1998 Mitsubishi Lancer

1 Answer

I have a 2002 Chevy Express van. All of the tail lights work except the driver side. Left signal light and backup light works fine. Problem: The driver side brake light works as long as the running...


The printed circuit board that the bulbs push into needs replacement. Any autoparts store will have it. It just screws into tailight assembly & attaches to wiring harness.

Nov 01, 2010 | 2002 Chevrolet Express

1 Answer

I have a pristine 2001 A4 1.8T Quattro. How do I change the front left fender turn signal bulb ? Thx....


Side-mounted turn signals, removing:
1. Press side turn signal lens against retaining tab in direction of arrow and carefully remove from fender opening.
2. Carefully pull housing "2" out of rubber socket "1".
3. Bulb "3" can be pulled out of rubber socket "1" for replacement.

70969a5.jpg
Installing:
1. Install in reverse order to removal.

Oct 13, 2010 | 2001 Audi A4

2 Answers

No lights


yes, tear dash apart and replace bulb :(

Oct 02, 2009 | 2000 Buick Century

2 Answers

Hole in A6 tail light lense.


the torx/allen head screws are there just hidden look around u will find them.

Sep 08, 2009 | Audi A6 Cars & Trucks

1 Answer

I have a 2002 Ford Explorer and both my headlights are burned out. How to I pull the headlights off so I can replace the bulbs? thx.


actually you do not pull off the headlight. Pop the hood and look behind the headlight and the bulb will twist in and out. You may have to remove battery to get to one of them. Also, be very careful not to touch the replacement bulbs, if you do as soon as you turn them on they will burn out again. The oils in your skin cause the bulbs to get too hot and burn out.

Jun 24, 2009 | 2002 Ford Explorer

1 Answer

Headlight bulb change


there should be two rods about 4" long with a 90 degree bend on the top at the rear of the light assembly straight down thru the top, pull them up and the whole assembly will pull out

Dec 26, 2008 | 1998 Chevrolet K1500

3 Answers

Lights out


The radio light is a separate issue and not related, the radio needs to be pulled out and a tiny bulb inside the radio replaced that lites up the display, the other issue is caused by a burnt out blower speed controller circuit or module.

Aug 05, 2008 | 2000 Pontiac Grand Prix

2 Answers

1997 mazda protoge 1.8 engine


check the actual globe is not blown

Jun 30, 2008 | 1997 Mazda Protege

Not finding what you are looking for?
1999 Chevrolet Cavalier Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...