Question about 1998 Ford Explorer

3 Answers

My truck is missing< i've changed the oxygen sensors ( both front ones) egr valve, spark plugs and wires and still missing. why egr valve and spark plugs. its because advance auto parts did a reading and showed egr and cylinder 1 trouble. i don't know what else to check for

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Bad plug wire?

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Have you checked or adjusted the timing? Depending upon the engine, you may have your timing off because of wear on the timing belt.

Posted on Aug 13, 2008

Try a compression test on that cylinder, sounds like you might have a valve problem

Posted on Aug 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are codes p1401 p0302 p0305 p1409 p0301


P1401 Differential Press Feedback EGR Circuit High Input
Your EGR port is plugged. Replace your EGR valve, and clean the ports
A code P0302 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer
  • A code P0305 may mean that one or more of the following has happened:
    • Faulty spark plug or wire
    • Faulty coil (pack)
    • Faulty oxygen sensor(s)
    • Faulty fuel injector
    • Burned exhaust valve
    • Faulty catalytic converter(s)
    • Running out of fuel
    • Poor compression
    • Defective computer
    • A code P0301 may mean that one or more of the following has happened:
      • Faulty spark plug or wire
      • Faulty coil (pack)
      • Faulty oxygen sensor(s)
      • Faulty fuel injector
      • Burned exhaust valve
      • Faulty catalytic converter(s)
      • Running out of fuel
      • Poor compression
      • Defective computer
      • A code P0302 may mean that one or more of the following has happened:
        • Faulty spark plug or wire
        • Faulty coil (pack)
        • Faulty oxygen sensor(s)
        • Faulty fuel injector
        • Burned exhaust valve
        • Faulty catalytic converter(s)
        • Running out of fuel
        • Poor compression
        • Defective computer
        • p1409
        • EGR Vacuum System Leak - Read Our Article on EGR Valve Codes For Help With This Oldsmobile Check Engine Light Code

Sep 25, 2014 | Cars & Trucks

1 Answer

How to install a EGR valve on a 2003 Nissan Xterra


EGR is for NOX

Too Rich a fuel mix is HI CO

Are the front or upstream oxygen sensors over
100,000 miles?
Air Filter new?
Always change oil before inspection & use full synthetic
Spark plugs over 2 or 3 years,won't pass insp
Clean MAF Sensor

Nov 23, 2012 | 2003 Nissan Xterra

1 Answer

I have a 1991 Cadillac Deville with a V8. It won't pass smog. Has high co. I replaced the egr valve, charcoal canister, spark plugs, spark plug wires, cap and rotor, catalytic converter, oxygen sen


Hello! when you say you checked the MAP sensor what do you mean? Did you take voltage readings at idle ? A vacuum leak is the likely culprit, especially to the MAP...The minor shake at idle being the major clue...Send a comment...guru..saailer

Dec 24, 2011 | 1991 Cadillac DeVille

2 Answers

P300 code have changed plugs wires cap rotor map sensor


A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.

A code P0300 may mean that one or more of the following has happened:
  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective computer

About the possible solutions, try...
* If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
* If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.

Keep us updated.

Jul 23, 2011 | 2003 Chevrolet Blazer

1 Answer

P0300 random misfire code


Causes:
A code P0300 may mean that one or more of the following has happened:
Faulty spark plugs or wires
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector(s)
Burned exhaust valve
Faulty catalytic converter(s)
Stuck/blocked EGR valve / passages
Faulty camshaft position sensor
Defective computer

Possible Solutions:
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.
Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.

Jun 30, 2011 | 2001 Mazda Millenia

2 Answers

Egr valve for 1997 cheve Blazer code is 0300 misfireing what could be the trouble


usually this code is followed by another number 1-4 or 1-6 or 1-8 depending on how many cylinders your vehicle has ,, what the code you got is a basic P0300 Random/Multiple Cylinder Misfire Detected A code P0300 may mean that one or more of the following has happened:
  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective computer
  • I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.
    Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck ope

Jun 23, 2011 | 1997 Chevrolet Blazer

1 Answer

My engin seems to be missing, what could be the problem?


It may mean that one or more of the following has happened:

•Faulty spark plugs or wires
•Faulty coil (pack)
•Faulty oxygen sensor(s)
•Faulty fuel injector(s)
•Burned exhaust valve
•Faulty catalytic converter(s)
•Stuck/blocked EGR valve / passages
•Faulty camshaft position sensor
•Defective computer

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

The underlying cause of random misfires that jump around from one cylinder to another is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.

Apr 02, 2010 | 1990 Buick LeSabre

1 Answer

Emissions Inspection Problem on 1998 3000gt. Gets a NO PASS/ NO FAIL. Not Ready Reading. What now? tks. JJ


you need a tune up. replace all spark plugs and spark plug wires.change air filter .make sure egr valve is working right.check oxygen sensor. check all vacuum lines.

Apr 21, 2009 | 1998 Mitsubishi 3000GT

1 Answer

Honda Misses.


Pin point the dead hole and check that injector.

Dec 23, 2008 | 1995 Honda Accord

1 Answer

I have a 1999 oldsmobile intrigue that is misting a lot. It idels rough, and runs rough. I can still take off it is a little slow, but I can still go pretty fast, but it still mist at the high speeds...


fuel pressure regulator on the fuel rail is probably it or the egr valve is stuck open allowing burnt fuel to flood the intake, im leaning towards the fuel pressure regulator because the o2sensor is probably reading rich or if its reading lean then i would choose the egr valve . good luck

Jul 06, 2008 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1998 Ford Explorer Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...