Question about 1994 Ford Crown Victoria

2 Answers

How to take out dash on 1997 crown victoria to replace heater core

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I agree with 'jthall1', it is a major pain! Undo every bolt and screw visible to the eye. Then you have to find the ones that you can't easily see! (They are near the defroster vents and under the dash and also behind the glovebox.) Now that you have it lose and it still won't come down for you, you have to remove the, i believe its 2, bolts holding you steering column up. At this point you can now pull the dash down and gain access to the heater core, which you will probably have to ***pry*** off the firewall. As previously stated, IT IS A PAIN!!!!!!!!!! PS- Don't forget to take the lines and bolts off the heater core from under the hood!

Posted on Aug 16, 2008

  • urfoolin Aug 17, 2008

    Oh yea, forgot about the top of the dash. You have to remove the panel that snaps over the front of the dashboard and the couple of screws holding around your instrument panel. After you get the front off and the top off, then you will be able to get to those unseen screws and bolts that hold it as well. Hope this helps and that you are up to this time consuming project.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Don't try it unless you know what you are getting into ( note from an ase cert L1 tech

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1998 crown Victoria and have replaced heater coreand now the car wont start... Any suggestions?


heater core means you had the dash all apart , yes?
that means the computer wiring is in that mess too.
run a computer test 1st

May 03, 2015 | 1998 Ford Crown Victoria

1 Answer

Instructions for replacing heater core in 1986 ford crown victoria LTD


Remove dash

disconnect heater core hoses in the engine compartment

open heater box, and remove the heater core.

Mar 01, 2014 | 1986 Ford Crown Victoria

1 Answer

Changing the heater core on a 1998 Crown Victoria


this job is not for the faint of heart! the dash board must be removed! if you would like to proceed email me and ill guide u the rest of the way

Mar 19, 2010 | 1998 Ford Crown Victoria

1 Answer

How do i get to my heater core 1995 ford crown vic


Your heater core is located behind the dash. You need to remove the dashboard and your heater core will be located on the passenger side along the firewall. It will look like a small radiator. Get yourself a haynes manual for good step by step instructions and pictures to remove your dash.

Jan 03, 2010 | 1995 Ford Crown Victoria

1 Answer

WHAT DO I REMOVE TO REPLACE HEATER CORE IN 1996 CROWN VICTORIA?


The dash has to be removed. The evaperator case has to be pulled forward to get to the clip or nut holding the heater case. It is a big job. If you are not comfortable removing the dash do not try it.

Dec 02, 2009 | 1994 Ford Crown Victoria

1 Answer

I have a 1995 crown victoria lx. heater core needs replacement. is it possible to access it by cutting the firewall instead of going through the process of removing the dash.


No you don't want to hack up your car like that. You are going to have to not completely remove the dashboard just loosen the bolts holding it and pull the right side section of it back enough to access the heater core you can use some wire to hold the right side of the dash in place.

Nov 30, 2009 | 1995 Ford Crown Victoria

1 Answer

Where is the heater core located on a 1989 Ford Crown Victoria and how do I replace it


Under the dash on the passenger side, pull it off after draining the radiator fluid from hoses that connect to it from the motor. Do it cold too

Jul 26, 2009 | 1989 Ford Crown Victoria

1 Answer

1999 crown victoria


You don't.
The dash has to come out in order to remove the HVAC box to get to it.

Apr 29, 2009 | 1999 Ford Crown Victoria

3 Answers

1999 Crown Victoria


the heater core is leaking.

Oct 24, 2008 | 1999 Ford Crown Victoria

1 Answer

Heater core replacement


If you replace the HEATER CORE, you might want to also replace the BLEND DOOR MOTOR as well while you're in there. These units tend to go bad very often in Crown Victoria's and Grand Marquis'. The job can be difficult but there are several ways to short cut it. You had to remove the dash board but if you have a 3 ft 2x4 or bar, you can prop the dashboard open after getting 75% of the screws out. The heater box is located behind the glove box. Take screws out from the top of the dashboard(right under windshield) and sides for easy access.

Aug 06, 2008 | 2001 Ford Crown Victoria

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...