Question about 1996 Chevrolet Blazer

1 Answer

Got fire & fuel but no start - 1996 Chevrolet Blazer

Posted by on

  • john_hodgden Aug 13, 2008

    No! Car runs perfect after it starts. Runs smooth without hesitations or rough idle. Distributor and cap secured solid, not loose.

  • Jeb Rogers May 11, 2010

    Have you checked timing

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check the fuses, then check the crank sensor. make sure the cap and rotor are good as well.

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not getting fuel to engine, fuel pump checks good ,what would cause this.it ran out of gas is there any way to prime it.


I was told if you turn your ingintion off & on, but dont try to start the car. You just want to cycle the fuel pump, you must do this @ least 10 - 20 times. Then pull your housing around the fuel injection & spray some starting fluid in there, but be careful because it can start a back fire.

Sep 06, 2010 | 1996 Chrysler LHS

1 Answer

Have replaced fuel pump, relay & fuel filter.


have you checked to see if you have a bad came or lifter. that would make it backfire. if it kind of spits fuel it maybe cam. if it throws fire than it could be timing like a bad chain.

Feb 12, 2010 | 1986 Chevrolet S-10 Blazer

1 Answer

I have an 1999 ford rsnger that wont start


DOES IT HAVE POWER/ A GOOD BATTERY? IF SO CHECK & SEE IF IT IS GETTING FIRE OUT FROM THE COIL PACKS,THE QUICKEST WAY TO SEE IF IT IS FIRE OR A FUEL PROBLEM IS SPRAY A LITTLE STARTING FLUID IN THE THROTTLE BODY,& IF IT CRANKS & THEN CUTS RIGHT BACK OFF ITS A FUEL PROBLEM,FUEL PUMP FUSE,FUEL PUMP RELAY,OR FUEL PUMP,& OR FUEL FILTER, IF ITS NOT GETTING FIRE IT COULD BE A CRANK SENSOR, A CAM POSITION SENSOR,COIL PACK(S) OR A FUSE OR RELAY.

Dec 05, 2009 | 1999 Ford Ranger SuperCab

2 Answers

Got fire but wont stay running without starter fluid ]


You may have a dirty Fuel filter or a bad fuel pump and will need to be replaced. Start with the fuel filter first since it's the easier one to replace and if you can get and fuel pressure regulator, check the fuel pressure at the shredder valve to make sure the fuel pump is pushing enough pressure. Not sure which engine code you have, X should have 42-45psi and the W should have 62-65psi. Good luck and hope this helps.

Nov 03, 2009 | 1995 Chevrolet Astro

1 Answer

1996 Chrysler Town & Country won't start


If you have fire, then it's probably a fuel problem. Turn the key to the on position, you should hear a 'whirring' sound from the gas tank, which is the fuel pump. This sound will only last a few seconds , but should indicate that the fuel pump is working. If no sound, check the fuel pump fuse, fuel pump relay, and the fuel pump itself . Good luck.

Aug 11, 2009 | Chrysler Town and Country Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...