Question about Honda Civic

1 Answer

I cant remove the starter - Civic Honda Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

Tools Needed: 17mm Socket Wrench with long extension and 12mm Combination Wrench
i cant remove the starter - 984987e.jpg
Unscrew the positive lead at the back of the starter with a 12mm combination wrench and using your hand pull of the solenoid lead. Next unscrew the 12mm wire harness bracket of the starter and put the bolt back to into it’s spot not to loose it. Next unscrew the two 17mm bolts holding the starter in place. Once all that is done you should be able to use the back of a hammer to tap the starter gently and I mean gently and remove it.

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CANT FIND THE STARTER


good luck to change the starter you gotta take off the front axle its so dumb u cant get to it unless you do that. good luck.. my advice take it into a mechanic. u really do have to remove the whole front axle

Sep 01, 2012 | 2000 Acura 3.5RL

1 Answer

I cant find where the starter is


OHV- ENGINE TO GET TO STARTER.YOU HAVE TO REMOVE REAR MOTOR SUPPORT BRACKET REMOVE THE AC COMPRESSOR SUPPORT ROD.REMOVE STARTER FROM UNDER THE CAR. THE OHC - ENGINE YOU HAVE TO REMOVE AIR CLEANER TO SEE STARTER DISCONNECT SPEEDOMETER CABLE.PUSH SHIFTER CABLE UP AND GUIDE THE STARTER ARMATURE END FIRST DOWN BETWEEN THE STABILIZER BAR AND THE ENGINE.

Nov 10, 2009 | 1986 Oldsmobile Firenza

1 Answer

How do i put a starter in a 1998 saturn sl


disconnect the battery cables,,go under the car,the starter is under the intake manifold,,,disconnect the 13mm or 14mm nut one the starter and wire and then disconnect the 8mm or 10mm(different depending on years) and remove the wire,then you have to 13mm bolts that hold the starter to the engine,remove the top bolt first you cant see it but you can feel it,,,then remove the bottom one and the starter will fall out and thats it

Oct 20, 2009 | 1998 Saturn SL

3 Answers

REMOVING STARTER ON 1994 TOYOTA CAMRY LE (6 CYLINDER), NEED TO KNOW EXACTLY WHERE TO FIND THE STARTER AND HOW TO REMOVE IT AND REPLACE IT


The starter is found under front end.. Near where the moter meets the trani - you will see the flywheel (a big round gear) the starter connects to the flywheel to turn the motor..

Disconnect the battery..
Disconnect wires from starter..
Should be 2 bolts that hold the starter in - remove them..

The starter goes in only one way so you cant mess it up..

Rate well ;o)

Jul 22, 2009 | 1994 Toyota Camry

1 Answer

Daewoo Nubira Starter Motor Refit.


changed a clutch on one of these a few weeks ago and cant remember what i done ,old timers i think ?? not sure but its from below with a rear support bracket ,and a inlet manifold stay bar ,,,3/8 drive socket set with a knuckle and 3 long extension bars to get to top inside bolt as well i think ?? honestly cant remember ,i work on all makes and cant remember every one

Apr 14, 2009 | 1999 Daewoo Nubira

2 Answers

What procedures do I take when removing and installing a new starter? 1991 lexus ls 400


Let engine cool down, remove battery terminals (negative first, then positve), remove starter. Install starter, install battery terminals (positive first, then negative), start and check for proper operation (no grinding noise or squeling).

Apr 03, 2009 | 1991 Lexus LS 400

1 Answer

Porsche 928s 1985 starter motor removal


Sorry you will have to remove the swaybar

Mar 03, 2009 | 1985 Porsche 928

2 Answers

Starter motor


Is there any sound when the key is turned? The solenoid may be stuck, and a light tap with a hammer may free it up. The starter is located on the engine block.

This is what you are looking for....
http://i8.ebayimg.com/02/i/001/22/0b/39e7_1.JPG


REMOVAL & INSTALLATION
STARTER MOTOR
Removal & Installation (2.0L)

CAUTION:When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. Before testing starter, ensure transmission is in Park or Neutral.

Disconnect negative battery cable. Remove air cleaner. Remove upper starter mounting bolts. Raise and support vehicle. Disconnect starter solenoid wire connections. Remove starter motor lower mounting bolt. Remove starter motor. To install, reverse removal procedure. Ensure negative battery cable is installed with starter mounting bolt. Tighten bolts to specification. See TORQUE SPECIFICATIONS table.

Removal & Installation (2.5L)

Disconnect negative battery cable. Remove air cleaner and air cleaner bracket. Disconnect starter solenoid wire connections. Remove starter support bracket. On manual transmission equipped models, remove shift cable bracket and disconnect cable. On all models, remove fuel supply line from support bracket. Remove starter bolts. Remove starter. To install, reverse removal procedure. Tighten bolts to specification.

Jan 01, 2009 | 2000 Ford Contour

1 Answer

Where is located the starter?


Hi..
On your 91 Lexus Ls400.
The starter motor is located :
Rear of the Engine. Under the Intake Manifold.
You can see unless you remove the intake.
Becuase for replace the Starter Motor on your car
You will need to REMOVE the INTAKE MANIFOLD.
To get axces to the Starter Motor.

The Aproximate time for Remove and Install the starter is:
5.1 Hours, labor.
I'm a Mechanic.
I hope this help on your question.
Thank you for use fixya..

Sep 05, 2008 | 1991 Lexus LS 400

2 Answers

Installing


you have two bolts on your starter take the two bolts out and take the wire off the strater

Jun 11, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...