Question about Ford Focus

1 Answer

Ford Focus removing a offside wing. how do i do this?? Y reg mark 1

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 19,396 Answers

It should have some tab that must be removed to take apart the wing

Posted on Aug 12, 2008

  • Ginko
    Ginko Aug 12, 2008

    You need to open the bonnet, remove the grille, then fasteners and clips, then you remove the screws that keep the bonnet stay.
    The whole procedure is quite complicated explained in this way, but it is relatively simple to put in practice if you have pictures of disassembling.
    To do it yourself you need to buy the Haynes manual for your car, there you will find illustrated step by step procedure. Here is the link:

    Ford Focus 2000 thru 2005 (Haynes Automotive Repair)

×

2 Suggested Answers

alicantecoli
  • 21990 Answers

SOURCE: Ford Focus removing a offside wing

hammer and chisel its spot welded on

Posted on Nov 12, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reolace front bumper 2001 ford focus ghia


raise and support front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps.
undo the screws holding wheel arch liner to front wings (1 each side) and the screws (3 each side) securing the bumper to the wings.Release the 6 securing clips from the top of the bumper cover and the 3 from the bottom. with someone helping, pull out the sides of the bumper and slide forward. Fitting is in reverse order

Mar 14, 2015 | 2001 Ford Focus

1 Answer

How do I replace offside electric wing mirror on my 56 reg Ford Focus Zetec Climate?


didnt know they made a ford focus in 1956 ,they still made the MK1 zeyphr and zodiac then the ford consul didnt come out till till 1957 ,so i assume its a modern focus and to change a mirror is a simple job just pull the triangular trim off the inside of the door at the back of the mirror and you will see three screws ,you should be able to unplug the multiplug without taking the door panel off undo the screws and the mirror come off .

Feb 18, 2011 | 2006 Ford Focus

1 Answer

Loose wing mirrow


Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

Jun 26, 2010 | 2000 Ford Focus

1 Answer

Left wing mirror has been bashed off


no problem its as easy as falling off a log,just prise the small plastic triangular trim off thats on the interior of the wing mirror and a star screwdriver .that easy trust me .shouldnt take more than 3 minutes

Jan 12, 2010 | 2000 Ford Focus

1 Answer

How do I fit a new focus 2004 reg non electic wing mirror (whole unit) ?


take 2/mins remove internal triangular plastic trim and undo the three screws ,evan my mrs can do it when she goes to supermarket and has one broke by a passing trolly .then tells me she has lost 30 euros ,or or i find an extra item on my account at motor factors

Dec 13, 2009 | 2004 Ford Focus

1 Answer

2006 Hyundai Tuscon, How do I remove the driver side headlamp to replace the bulb? I removed the two bolts, but can't pull it out.


hi from uk if the headlight assy is anything like some here in uk ie ford focus ? you may find there is a 3rd bolt tucked away out of sight this is probably located as on focus ? if you feel or use amirros? and look/feel on the inner wing between h/lamp and inner wing you may find a small bracket that is attached to inner wing ? and another on the lamp assy these 2 brackets are locked together with a 10 mm spanner/socket bolt approx 6 ba threaded unfasten and remove bolt the lamp will probably come out best to use 3/8 or 1/4 " drive socket+extention ?

Dec 07, 2009 | 2006 Hyundai Tucson

1 Answer

I need a diagram of an ford focus timing chain and cambelt for x reg 2000 i am tranferring a timing chain and a timing belt and diesel pump from one engine to another. im not sure how to get the engine to...


TDC has marks on the pulleys and engine block to line up, best bet is to get a haynes manual to show you exactly where. Too complacated to explain where they are on this

Sep 03, 2009 | 2000 Ford Focus

1 Answer

Need to change the wing mirror on my ford focus c max but dont know how


remove the plastic cover directly behind the mirror on the inside of the door, it just clips off normally with a flat blade or knife (Blunt knife if possible as a sharp one may cut the upholstery)
Once removed you should be able to see the retaining bolts that hold the mirror to the door.
If you have electric mirrors there should be a multi wire electrical plug you will have to disconnect before removing the mirror.
Hope this helps

May 30, 2009 | 2005 Ford Focus

1 Answer

Ford Focus removing a offside wing


hammer and chisel its spot welded on

Aug 12, 2008 | 2001 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...