P0705 - 2001 Saab 9-3

P0705 Ford Transmission Range Sensor Out of Position

BMW transmission range sensor position Vehicle Parts ...

www.fixya.com/tags/transmission_range_sensor_position/auto.../bmw

BMW vehicle parts & accessories transmission range sensor position related ... i got a transmission fault warninig my bmw car 545i E60 it is a 2004 E60 bmw car ...location transmission dipstick 1997 bmw 328is if its a manuel transmission it ...

P0705 Transmission Range Sensor TRS Circuit Malfunction

www.obd-codes.com/p0705

Transmission Range Sensor Circuit Malfunction (PRNDL input) ... Later models with the transmission range sensor located in the valve body are a different ball ... What causes the P0705 code on a BMW 740i ('97) ... 2004-2015 OBD-Codes.com.Missing: 545

EOBD II Error Code: P0705
Fault Location:
Multi-Function Transmission Range Switch - Malfunction (PRNDL Input) - Implausible Signal
Possible Cause:
Wiring/Connectors from/to Multi-Function Switch faulty.
Multi-Function Switch faulty.
Engine control module (ECM)/Powertrain control module (PCM)/Transmission control module.

Possible Solutions:
Check Wiring/Connectors from/to Multi-Function Switch.
Check Multi-Function Switch.
Check Measuring Value Blocks.

P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input). It means something is wrong this sensor, take your car to a Transmission Shop to further diagnose the problem.

Just change the air flow meterThe diagnostics are all wrong.

P0705 - Range switch signal incorrect P1529 - MIL on request (from TCM). P0705 tells you there's a problem with the transaxel range switch. Replace it.

there is a tsb that states a p0705 can be a range switch out of adjustment. To adjust the switch apply park brake, put trans in neutral, remove aircleaner assy, check that the holes line up prefectly in the switch and lever.
I have one in the shop that has some other problem not apperant with the same code.

Usually a P0705 means your TRS (transmission range sensor) is shot. It is what looks like an old backup light/neutral safety switch and is attached to the transmission where the shift lever goes in. .

P0705 Transmission Range Sensor Malfunction (PRNDL Input)

This is an external problem.P1134 is telling us that upper O2 sensor on bank 1 -which is firewall side- is responding slow and needs to be replaced. P0705 is showing the transmission range switch -which is located on the top of the transmission just under the battery tray- has given up. That is why the shifter indicator lights acting weird. Replacing these two parts will take care of your problem.