Question about Chevrolet Corsica

Open Question

Can you tell the location of the crank position sensor on a 1990 corsica 2.2L engine? Do you have any pictures of this part location?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crankshaft position sensor located in the 1990 Chevrolet Corsica 4 cylinder 2.2 liter engine?


Follow this link to a diagram that will show you where it's located. Hope this helps.

Jul 11, 2016 | Chevrolet Cars & Trucks

1 Answer

Where does the crank angle sensor go on a 1990 dodge daytona es turbo and what does it do


crank angle sensor, Crank position sensor ,reads the position in degrees of the crankshaft. When the sensor reads a set point on the crankshaft it sends a signal to the ECM(CPU) program which then triggers the spark for that positioned cylinder. It also triggers the injector to squirt. Without it the CPU will not know when to set the spark or injector so nothing works.It is constant for all ECM controlled engines regardless. Further the cam shaft position sensor sends a signal to the cpu telling it that the valves are in the correct position for spark,fuel. When the cam belt/chain breaks there is no position regestired so the spark and fuel are shut off

Dec 05, 2014 | 1990 Dodge Daytona

1 Answer

I have 88 chevrolet corsica. No spark at the plug wire put new coils / module on still no spark can the crankshaft position sensor stop it from getting spark and i checked all te fuses Bill


Yes the cam sensor could fail to send a signal to the ignition module, but a V6 engine does not use a cam sensor.
It does use a crank sensor.
You would need to know that the ignition module and coils have battery voltage, then you would need a book to give you the test procedures for the computer and crank sensor.

Mar 17, 2013 | 1988 Chevrolet Corsica

1 Answer

Where is the crankshaft sensor on a 93 chevy corsica 3.1 engine?


chevy corsica 3.1L crank sensor is located on the front of the engine above the starter.

Feb 28, 2012 | 1993 Chevrolet Corsica

1 Answer

Where is the crankshaft position sensor located on a1991 chevy corsica 2.2 engine


The sensor is located Under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. It has the small elec. connecting plug.

May 03, 2010 | 1991 Chevrolet Corsica

1 Answer

Where is the caMSHAFT sensor on a 1990 chevy corsica it is cranking over but not starting up, have checked the fule line and am getting presure as well as flow. Took out a spark plug and held to engine and...


look behind the harmonic ballancer pully if not there it is in the coil pack where the plug wires attatch either on the front side of the motor or next to the firewall .

Aug 24, 2009 | 1990 Chevrolet Corsica

1 Answer

93 chevy lumina crank sensor location


front of engine just about 11:00 over crank pullry

Jun 12, 2009 | 1988 Chevrolet Corsica

1 Answer

Location of crank position sensor on 92 chevy corsica 3.1


You will have a no start or stalls after engine gets hot and then cools down restarts, the sensor is on the front of the engine mounted into the cam gear cover if it is not visiable get under the, (here is a picture) car and look.d37e0b9.jpg

Jan 21, 2009 | 1988 Chevrolet Corsica

1 Answer

Crank sensor


The crankshaft position sensor is located on the right side of the engine block.
moz-screenshot.jpgTypical DIS Crankshaft Sensor 41844070

Dec 21, 2008 | 1990 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...