Question about 1985 Chevrolet Chevy

2 Answers

1985 chev S-10 4x4 6 cylinder pickup having starting problems

I have a 1985 chev S-10 4x4 p.up 6 cylinder, put new starter in, still not starting any suggestions 4x4 S-10 pickup

Posted by on

  • clay richards Jan 14, 2012

    is there a starter celenoid on the left side of the finder well. its probly out. check and see nif it has a crank or cam sensor. if they go out it want start. good luk, claymiester



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your truck is a manual like mine is ,you may have broke the ring gear, thats what happed to mine

Posted on Oct 19, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Check your electonic ignition swith under dash that the ignition acuator rod connects to about $8 part at parts store

Posted on Aug 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a 1984 Toyota Maual pickup 4 cylinder, Put in new battery but still nothing when turning key, have head lights but absolutly nothing else.

if the starter is not making any noise then try tapping the starter while someone tries to start it.if the car turns over then you have a bad spot in the starter and will have to be replaced.

Jul 07, 2011 | 1984 Toyota Pickup Deluxe

1 Answer

I have a 1985 toyota pickup 2wd. the passenger rear end brakes locked or freezed and dont know how to fix it

Rear wheel cylinder by that are often bind up from corrosion.
But by turning the adjusters down, through the port in the back of the backing plate, you should be able to get the drum off. Then you loose then brake line, remove the shoes, take the cylinder retaining bolt out, and the cylinder should come right out.
When you install the new one, fill it with brake fluid first, and there will be less air to bleed out.
If you want to be cheap, you can probably leave the old cylinder in, take it apart where it sits, hone it out, and put in new rubber seals, use a lot of brake grease, and you can do it for about $10.

May 06, 2011 | 1985 Toyota Pickup

2 Answers

I have replaced the relay switches on my 1985 diesel isuzu pickup and had 2 of the four glow plugs tested and they are good, however my truck is hard to start. It will start if I crank it over a bunch or...

For old diesel engines. Some starting issues may be solved by upgrading your starter and checking your electrical system if it's providing enough power for the starter.

Oct 27, 2010 | 1985 Isuzu Pickup

1 Answer

I have a 89 toyota 4x4 V-6 and it wont start i just put a new starter in it wont crant over battery is good it only starts everynoy and then

i have a 1989 toyota pickup 4x4 3.0 v6 changed the starter and only starts if its warm out brand new batt. new starter. help me with problem

Sep 07, 2010 | 1989 Toyota Pickup SR5

3 Answers

Can i jump start my 1985 nissan truck if starter is shot, I tried to jump start my truck but it wouldn't start

If the starter is shot no jump start should not work. The starter is what spins the motor.

Jun 12, 2010 | 1985 Nissan Pickup

1 Answer

My Dodge 1985 d150 won't start. New starte,

if you hear a loud click from starter it could be the motor contacts in the starter have gone bad. you will have to remove starter and have it repaired or replaced. check again to make sure that the battery is charged up on truck. also check for a loose ground wire to starter or engine block.

Apr 26, 2010 | 1985 Dodge Pickup 4WD

1 Answer

Put in new clutch, pressure plate, throw out bearing and pilot bushing in 85 nissan pickup. When I started it it started clattering real loud. i thought the starter was sticking but the sound may be coming...

must of left something loose or something is floating around in there.mabee one of the clutch cover bolts fell out. anyway looks like you will have to take it back apart, no other way around it.also you didnt mention whether you took off the flywheel but it could be loose

Apr 01, 2010 | 1985 Nissan Pickup

1 Answer

1985 Chevrolet S10 electrical issue

on the big stud you will have about 3 wires they are the( FUSEABLE LINKS) plus the main battery cable
check thoses 3 wires they are most likely the problem
to check them SLIGHTLY PULL ON THE WIRE it will most likely streach and pull apart or there will be BLACK plastic juntions that the wire goes into pull the wire from there
to repair cut the wire pass the BLACK juntions
USE ONLY HEAT SHRINK **** CONNECTORS tape the wire together
reconnect the 3 wire to the starter
hope this helps

Jan 04, 2010 | 1985 Chevrolet S-10

3 Answers

Ignition switch? 1985 Nissan Pickup

I have the same truck I rebuilt, it, took 2 years. Its on car heres the link.

The problem is with the wire going to the starter, the relay telling the starter to work. it will get loose or caroded, check that first, it sounds like your problem. Good Luck!!

Oct 15, 2008 | 1985 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides