Question about Mazda Millenia

1 Answer

Noisy lifters - Millenia Mazda Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 45 Answers

Unless you have adjustable rocker arms the only way to get rid of noisy lifters is to replace them.

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge neon 2.0 L sohc how to remove lifters from rocker arms


Ok here is the deal, the lifters are poorly designed and prone to noise or "tick", the way to silence this is not just new lifters but new rocker arm assemblies which include new lifters. Use the best parts not the cheapest ones, factory new one are improved from previous designs. If you still want to just replace the lifters you must take the rockers to a machine shop and have the lifters pressed out and replaced by them. Another suggestion is if you live in a warm climate use 10W-30W synthetic oil.

Aug 30, 2016 | 1996 Dodge Neon

1 Answer

What helps with noisy engine lifters on 2008 bmw 328i coupe?


You will have to do a valve clearance set, a mechanic will know how to do this, hope this helps

Aug 30, 2014 | 2008 BMW 328xi Coupe

1 Answer

Ford Mondeo 2010 lifters noisy


Hi, the lifters can be noisy of luck of oil. Check what oil should be used on your car specification. If they still noisy that mean you need to replace them.

Jul 23, 2013 | 2010 Ford Mondeo 1.6

1 Answer

Why are the lifters getting louder and intermittent sputter.


There are several reasons for noisy lifters. They could be starved for oil due to low oil pressure or dirt in the engine.
When the lifters are noisy they are not opening the valves completely, which can cause the engine to run rough.

May 11, 2013 | 1999 Chrysler Sebring LXi

1 Answer

1990 Pontiac Lemans 1.6l noisy lifter problem


Really, really, sorry to suggest that the head gasket may not have oil passages lined up. Always lay the oil gasket over the new gasket to see if each and every hole is punched out and lines up to the old gasket.

Also, each lifter needs to go back to its original spot. The Cam lobes are worn for that lifter and a mismatch can be possible. A mismatch could mean extra play in a badly worn lifter face mated to a badly worn Cam lobe.

If that is what you did then get new or rebuilt lifters. Check out Compcams.com for a detailed description of each engine scheme. Your engine may have a thrust plate for the lifters and it may be incorrectly installed creating noise.

Feb 12, 2012 | Pontiac LeMans Cars & Trucks

2 Answers

All lifters started clicking at once


Sounds more likely to be a timing rattle rather then all the lifters at once making noise, if your EGR valve is bad this will happen and if the timing is off it will also do this, I can't buy the theory all 16 hydraulic lifters are noisey unless you over reved it something fierce, or ran it out of oil, or had someone loosen all the rockers.
Happy Motoring!!

Aug 04, 2010 | 1998 Chevrolet C1500

3 Answers

Looking to adjust valves on a 2.2 chevy motor in a Corsica hydraulick lifter


Sorry but there is no valve adjustment with hydraulic lifters - can turn the lifter upside down fill with oil - let sit for a while and then tap on the lifters to see if they make noise - if noisy replace.  Camshaft may be worn on the lobes or may have jumped timing if belt.

Jun 09, 2010 | 1994 Chevrolet Corsica

2 Answers

Noisy lifters


Marvel Mytery Oil has always been known to cure sticky lifters. Another old trick is to add a qt. of trans fluid inplace of motor oil next time you top it off. Trans fluid is very high detergent.

Mar 02, 2010 | 2004 Mazda 6

1 Answer

Noisy or lifters


well yes if its noisy it could well be the lifters causing the noisy


Aug 06, 2009 | Ford Fairmont Cars & Trucks

1 Answer

92 caddy, noisy lifter, how to fix without break down?


If your question is "how to fix a noisy lifter without tearing apart a secton of engine FORGET IT. If your concern is will a noisey lifter cause a BREAKDOWN, than the answer is basically NO. Hope this helps

Apr 19, 2009 | 1992 Cadillac Fleetwood

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...