Question about 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Lights on a 2001 ram 1500

Replaced a bulb and socket on the license plate and all of a sudden the parking lights, daytime running lights and dashboard lights stopped working. i replaced the headlight switch and it didnt help. any ideas????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 188 Answers

Sounds like you blew a fuse or 2. Disconnect the socket you just replaced , replace any bad fuses and check. If it works, be sure you are hooking the new socket up correctly.

Posted on Aug 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good


check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

Tag light is not working. is there a fuse that will get the light turned back on?


The fuse labeled REAR PARK LP 15A in the right instrument panel fuse box powers the rear park lamps, and the tag lamps. If your rear park lamps are working then you most likely need to replace the tag lamps (bulbs). Use the following procedure to replace the lamps.

To Remove:
  1. Remove the two mounting screws from the license plate lamp.
  2. Remove the license plate lamp from the rear bumper fascia.
  3. Remove the license plate lamp socket by turning it counterclockwise.
To Install:
  1. Install the license plate lamp socket by turning it clockwise.
  2. Position the license plate lamp to the rear bumper fascia.
  3. Install the license plate lamp mounting screws.

Feb 17, 2011 | 2004 Chevrolet Impala

2 Answers

Where is the liscene plate lights fuse at


The driver's side fuse block is to the left of the steering

wheel, under the instrument panel.

Snap off the cover to reveal the fuses. You'll find a fuse

puller clipped to the inside of the cover. Place the wide

end of the fuse puller over the plastic end of the fuse.
Squeeze the ends over the fuse and pull it out.

The Parking lamps and running lights and license plate lights all run off the same fuse, it is fuse 8c in the above fuse box

Sep 17, 2010 | 1997 Buick LeSabre

2 Answers

Dodge Ram 1500. I have no tail lights, license


Check the fuses in the fuse panel marked for those lights.

Feb 07, 2010 | 2004 Dodge Ram

1 Answer

Would a blown fuse be the cause of a Dodge 1500 losing tail light


Hello. Definitely check the fuses, but also check the ground for the lights in the rear end as your symptoms could also be the result of a poor ground.

Nov 23, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Tail Light and License Plate lights stopped working


With light switch on, test the wires leading up to the mentioned lights with a test light(cost about 5 or 6 bucks at wal-mart) that way u can eliminate any corrosion questions and get to the source quicker, if test light indicates that the wire is hot, than check connection areas for any wear and tear and possible carbon corrosion. Check lightbulbs, my license plate light stopped working and wire was hot, but wouldnt turn on due to the housing base, got too dryrotted and wouldnt function propery, had to rig it up, but works now.

Jun 08, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How do i change rear turn signal bulb on 89 corvette, notmine???


Rear Turn Signal, Brake and Parking Lights 1984–89 VEHICLES
  1. If removing an inner bulb, remove the license plate. For outer bulb replacement, reach from under the vehicle.
  2. To remove the inner rear brake light, you must reach behind the license place and under the vehicle to access the bulb and socket
  3. Remove the socket from the lens by releasing the locking tab and twisting
  4. Once the bulb and socket are pulled from the rear of the lens, grasp it from behind the license plate opening
  5. Then, pull it out of the side and replace the bulb
  6. Remove the bulb from the socket and replace.
  7. Installation is the reverse of the removal procedure.

Apr 05, 2009 | 1989 Chevrolet Corvette

1 Answer

Replacing Bulb for License Plate on 2001 Buick Park Avenue


Have you tried to see if there is access underneath to that bulb ?

Jan 17, 2009 | 2001 Buick Park Avenue

Not finding what you are looking for?
Cars & Trucks Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...