Question about 2000 Mercedes-Benz S-Class

1 Answer

Central door lock switch is not locking and unlocking, i have to do it by hand

Posted by on

  • Jesse Garcia May 11, 2010

    what year?S500,600?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The problem you may have resides in the wire harness or the control unit which manages all the electrical power to relay to open the door. This wil be costly over $1000 from the dealer repair + diagnostic fees of $200 (typical Mercedes Dealer charge).

Posted on Aug 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The central locking system on my 1993 vw microbus locks and unlocks continuosly


yes its spooky isnt it
the locks are out of sync
with radio code i hand if needed
undo battery terminals ( wait a bit )
re connect battery
try again

if no better one of the door actuators is faulty
the interior door master switch is faulty
central locking controller module will need to a
diagnostic reader and fault read and clear the fault
or replace the module



26222548-1rqsdozfiipimhxac415ohhu-1-0.jpg

Jun 21, 2016 | Cars & Trucks

1 Answer

My back L/H door won't lock with remote central locking


Will that door unlock from the master switch at the drivers door or the rear left doors own switch ?

Jun 14, 2016 | 2004 Subaru Outback H6-3.0

2 Answers

Mervia. Why is central locking not locking any door?


It's only an educated guess. If all other locks switches are working it' either the switch panel itself or an electrical short. Switches are popular, get it checked first

Nov 22, 2015 | Vauxhall Cars & Trucks

1 Answer

I have a 2002 ford f150 supercrew lariat, my power door lock on all 4 doors dont work and neither switch works, theres is no clicking sound or anything, but the lights on the switch light up, also the...


You can't figure out thing's without knowing how there work , what controls them . In this case a control module .
Principles of Operation

Power Door Locks
The central security module controls the power door lock and keyless entry system. The lock and unlock operation is carried out by supplying ground to the central security module from the door lock control switch. The normal path of the actuators is to ground through the central security module. The door lock control switch will lock and unlock all doors by grounding the appropriate circuit to the central security module. The central security module then supplies power to the appropriate common actuator circuit to lock or unlock all doors.
Plus we don't guess , we test the electrical circuits with a DVOM - digital multimeter or a test light . We use a wiring diagram so we know which part of the circuits to test .

Keyless Entry
The remote transmitter sends a frequency that is received by the central security module internal antenna. Depending on the frequency received, the central security module will lock all doors or unlock the driver door. If the unlock frequency is received again within five seconds of the first unlock, the central security module will unlock all doors.
If the frequency received is for the panic button, the central security module will cycle ground to the park lamp and horn. The park lamps and horn will continue to cycle until the panic button is pressed again or the ignition switch is turned to the RUN position or 2.75 minutes elapse.
Plus we hook up a scan tool that can read codes from the control module , not a code reader for engine codes , won't work ! Need a professional scan tool .Do you know what DTC'S are ? Diagnostic trouble codes !
Central Security Module Diagnostic Trouble Code (DTC) Index DTC Description Source Action to Take B1309 Power Door Lock Circuit Short to Ground Central Security Module Go To Pinpoint Test C . B1341 Power Door Unlock Circuit Short to Ground Central Security Module Go To Pinpoint Test C . B1485 Brake Pedal Input Circuit Short to Battery Central Security Module Go To Pinpoint Test E . B1526 Keyless Entry Circuit Short to Ground Central Security Module Go To Pinpoint Test F . B1629 PRNDL Reverse Input Short to Battery Central Security Module Go To Pinpoint Test E . B2276 Less Than Two Transmitters Programmed Central Security Module Go To Pinpoint Test I . B2425 Remote Keyless Entry Out of Synchronization Central Security Module Go To Pinpoint Test I . - All Other DTCs Central Security Module REFER to Section 419-10 .
  • All door locks are inoperative
  • Battery junction box (BJB) fuse(s):
    • 8 (15A).
    • 115 (20A) (Super Crew).
  • Circuitry.
  • Central security module.
  • Go To Pinpoint Test C .

Seams you lack the knowledge and test equipment to tackle this type of repair . Your best bet mite be to have a qualified repair shop check it out.
So, without testing i couldn't even begin to suggest what mite be wrong . I would only be guessing , as would anyone on here would.

Jul 30, 2017 | Cars & Trucks

1 Answer

Central locking not locking all locks from drivers door, will unlock, but not lock. working fine on passenger door with key, locks all. switch to activate central locking on drivers door unlocks but doesnt...


You will need to replace the driver door switch. You can try to pick a switch up from the dealer or a local car wrecker (i.e. Pick-n-Pull). It will involve learning to take apart the door trim panel.

Sep 05, 2011 | 1993 Toyota Corolla

1 Answer

1998 camry vienta grande. Central locking does


Your central processor is erratci and givng into wrong commands. Start from exiting one by one from the battery of the remote to the main hand rest., Check for poor connection in the wiring harness specially in the areas of the door hinges where the wires go into the customer control.Also try to find out if any moisture or oil has clogged on to the main Unit.
Hope you have patience.

Jun 28, 2010 | 1998 Toyota Camry

1 Answer

Trouble with central locks


unlock relay is bad... ???.. amazing

Aug 25, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Jeep grand cherokee central locking system


If all the doors do not lock or unlock when using the passenger side switch, then the switch itself is probably bad.   If the passenger side switch locks or unlocks all the other doors except for its own, then the power lock solenoid inside the door is bad or jammed.  If it is jammed, try locking and unlocking the door manually while activating the switch to work its way free.

Dec 13, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Mercedes-Benz S-Class Logo

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...