Question about 1999 Chevrolet Blazer

1 Answer

No brake lights at all.I have turn signals, flasher and tail lights but no brake lights.the fus is good and the brake switch is good.

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem, the brakelight switch is constantly becoming lose, there is no solution, but to wire the switch in, so it cannot move, welcome to America.

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace multi-function switch 2005 mariner


The tail light is usually a bulb with lower wattage, so it won't glow as brightly as the brake and turn lights.. There should be one or two other bulbs in either of the two tail assy's. The turn signal can use the same bulb as the brake light. If so, it's up to the flasher assy to direct the lights to both come on, and/or for one to flash if the brake and turn signal is on, e.g.. There could also be a backup light.

So if the brake and turn lights don't operate, look to the fuses, and flasher assy. for possible replacement.

Jun 01, 2015 | 2005 Mercury Mariner Premier

2 Answers

How to change 2000 Buick Century Turn Signal Flasher


Did you check fuse? Reference owners guide. If you can check for voltage at fue, stick paper clip in fus slot (red, positive lead) negative lead to chasis. REPLCACE ALL LIGHT BULBS AT ONCE then have some one push brake while you hold brake bulb in your and watch to if it blows, if not turn key to on flip turn signal see what happens let me know what you see, Good luck

Aug 18, 2014 | 2000 Buick Century

1 Answer

Turn signal,brake lights not working


I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Jul 24, 2012 | Cars & Trucks

1 Answer

Iv got an 88 F150 4x4 iv got turn signals light fuse is good got power at break switch need no break lights and is there suppost 2 b 1 r 2 wires coming out of fuse box


Do you have power at both sides of the brake switch when the brake is applied? If so it sounds like the turn signal switch is bad. try turning on and off the 4 ways a few times. sometimes this will clean the connections and it will start working.
The power goes through the fuse to the brake switch. from the brake switch to the turn signal switch from the turn signal switch to the tail lights. If the 4 ways are on the power goes through the 4 way fuse to the 4 way flashers then to both sides.
If the turn signal is on and the brake is on, the turn switch cansles the power from the brake and uses power from a 3 fuse and flasher for the side that the turn signal is called for.
If I typed to fast let me know. I can answer any questions you might have.
If this helped you please vote 4 thumbs up. :-)
good Luck and God Bless

Jun 07, 2011 | 1988 Ford F 150

1 Answer

2001 Town & country brake lights not working, but the third brake light and tail lights are working. I also just replaced the brake light switch thinking it was the problem, but it wasnt


I think the brake light and turn signal are on the same bulb on these, correct?

If so do the turn signals work?

If they do than I would bet that the turn signal switch itself is the problem. The power for the brake lights is routed through the switch (except for the third brake light that is supplied power directly form the brake switch). The turn signal switch will interrupt power from the brake switch and supply power from the turn signal flasher depending on if the right or left turn signal is engaged.

Sometimes wiggleing the lever or pushing the four way flasher button with the brake pedal depressed will intermittantly cuase the brake lights to work. If this is the case than it is the turn signal switch that is causing the problem.

Feb 11, 2011 | Chrysler Town & Country Cars & Trucks

3 Answers

Tail lights but no blinkers or brake lights


there are two turn signal flashers under dash one on fuse box and one next to the light switch have to look up behind dash behind light switch for second I had same problem

Mar 14, 2009 | 1985 Jeep CJ7

1 Answer

99 Rodeo Right turn signal makes brake lights blink


TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Jan 02, 2009 | 1999 Isuzu Rodeo

1 Answer

Brake lights only show on center 3rd high stop tail lamp


Yes, the flasher does interrupt the brake signal. you do know that this is a push on, push off switch. Some try to pull this switch to turn off flashers, but, it has to be pushed again to turn off.

Nov 30, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...