Question about 2004 Mazda 6

1 Answer

Left turn signal

My front driver side turn signal is out and I have lost my owners manual. So I can't find a fuse to check. Where if there is one would the fuse be found.

Posted by on

  • 1 more comment 
  • diedraford Jan 16, 2009

    I have this exact same problem w/ my drivers side blinker not working & my back driver side blinker goes reallllyyyy fast! - I called the dealership - They said that there is a TSB for this problem- & it could be 1 of 3 things ranging in cost from $24 to $800 - to me I would rather deal w/ no front blinker!!

  • Anonymous Feb 12, 2009

    the drivers side blinker does not work on my Mazda 2004 and the back blinker blinks really fast......i would like this fixed,,,and i sure in the heck will never buy another Mazda,,,too many troubles.

  • kirkvan Feb 28, 2009

    My Front Drivers side blinker was working about 10% of the time. When it didn't work the back blinker would flash really quick. I just returned home from the shop where they put in a new bulb. When I left the shop it worked fine, but by the time I got home it quit working. Anyone have any ideas????


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

All the turn signals are on the same fuse I recommend you check the bulb, the socket make sure there is no corrosion and make sure the ground wire is good to test this make a temporrary ground wire and see if it works if you find this information helpful please give me a good rating and if you need any additional help please contact me

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What could be causing the front turn signals to not work?

Hi, it sounds like bad wiring like you say, you're gonna have to get rid of all the add on stuff, cause the way I see it, it might requiere a higher capacity fuse, the down side is you leave your computer more expose to electric damage and/or a short circuit leading to a fire (dangerous). Best solution is... get rid of all that stuff and if you feel it's best, re-wire.

May 17, 2014 | 1994 Honda Accord

1 Answer

What make the turn signal stop blinking

check the lamps inside the turn signal housings on the side of the vehicle your trying to passenger side front and rear or driver side front and rear.

Also is it only one side, or both? when turn indicator is operated?
check fuse block to see if fuse is blown. owners manual will show a fuse box location and identify which fuse if for turn indicators

Jan 27, 2013 | Cars & Trucks

1 Answer

Where is the fuse for the turn signals in a 1996 Chrysler Town and Country Van located?

its probly under the hood in a little black box it should say fuses if not there check under the dash on the drivers side

Oct 03, 2012 | 1996 Chrysler Town & Country

1 Answer

I have a 2000 GMC P/U and the dealership gave me a 1999 manual. the fuse block is different. Which fuse contols the driver's side turn signals

None, check your light bulb socket and voltage if you have a 12v probe.
Turn your 4 ways on and see what's flashing.
Probes are cheap and a great thing to have.
Probe the socket and see if you have power.
You don't say if it's the front or rear, that would help.
Also it could be your turn signal switch or light sockets.

Nov 17, 2011 | 2000 GMC New Sierra 1500

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working

check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

1 Answer

Where is the turn signal flasher relay located on a 2001 f150

2001 Ford Truck F250 Super Duty P/U 4WD 5.4L EFI 8cyl the Flasher is located front seating area, driver side, behind left hand side of instrument panel, on fuse panel. Check the FUSE PANEL...


Also can check this and other details in your 2001 Ford F-250 - Owners Manual. (page 172 and next).

Good luck (remember rated this help).

May 13, 2010 | 2001 Ford F250 Super Duty Super Cab

2 Answers

Tail lights work on both sides. turn signal and

Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

The turn signals don't work. Which fuse?

it could be one of the fuses in the under the hood fuse boxes, if not check the inside fuse panel and the flasher relay located under the dashboard panel driver side, refer to owners manual/ repair manual for exact location if you have difficulty locating it yourself

Jul 12, 2009 | 1992 Mercury Sable

2 Answers

No trun signals and emergency flashers

The fuse panel is located to the left of the steering column, and is hung from the instrument panel. To expose the fuse panel, pull the release bar up with right hand and pull panel down with left hand and remove cover.

Replace the blown fuse with the same amp number listed on the old one.

Front and rear turn signals use slot 1 with a 15 amp fuse.

May 02, 2009 | 1993 Ford Taurus

1 Answer

Turn signal out --- fuses ok ---on 96 suburban

change your turn signal relay it is a small square module that plugs into one of the relay slots in the fuse box under the drivers side dash area

you may need to check your owners manual for the exact location
and slot number

you can find these at any auto parts store..
(turn signal relay)

good luck hope this helps

Dec 10, 2008 | 1997 Chevrolet Suburban

Not finding what you are looking for?
2004 Mazda 6 Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides