Question about 1997 Ford Ranger SuperCab

1 Answer

My Ford Ranger

I am having several problems with my truck minor however not so simple ( to me anyway ). To begin with, I need to know how I could get my heater core out of my dash board to replace it. Second of all I cant figure out how or even where my speedometer cable is to hook it up. And last but not least, I cant figure out what fuse if it is a fuse I need to change to fix my fuse guage. My truck by the way, is a 1997 ford ranger. Any help would be greatly appreciated.


Thanks,

James

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

My 86 ranger heater core was behind the glove box, not to hard to replace, remove two hoses and access cover.
speedocable connects behind instrument panel and to the side of transmission. (electrical ones are easier, just a small component on the side of trans.)
i think you mean FUEL gauge? there is a sending unit inside the fuel tank (sometimes fuel level sending unit is combined with the fuel pump) buy yourself a Haynes manual #36071

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 ford wl starting in morning can't for a while than starts n when starts it miss for a while than ok


Check your spark plugs and leads then check coil packs. Look for heavy deposits at plug tips. Could be you need a new air cleaner. Theses checks always come first....then move through to checking fuel flow, is there a minor fuel block, is the fuel pump performing correctly ? Etc.... Simple first..... Red.

Dec 19, 2014 | 2007 Ford Ranger 2.5

2 Answers

1999 ford ranger no power to fuel pump new pump 1 month ago tryed reset button no change


Have you tried changing the fuel pump relay, or fuse? I have always went by one rule first and that is (never overlook the obvious) most of the time it's something simple hope this helps

Oct 10, 2014 | 1999 Ford Ranger SuperCab

1 Answer

How do I remove oil pan on 88 4x4 ranger?


You need to pull the motor, trust me it is an absolute nightmare doing it in the truck and you have to hoist the engine off the mounts anyway.

Mar 24, 2014 | 1988 Ford Ranger

1 Answer

Fuel pump wireing no fuel getting from pump to engein


Just a suggestion---these are known for the relay under the hood for the fuel pump to go flaky---locate and clean the contacts (it should pull out) and or tap on it to see if fuel pump begins to work again--clearly if no fuel coming out the pump could be bad.

There are several ranger/explorer forums on the net with good info for many problems--Google year and problem to see what comes up.

Oct 29, 2012 | 1986 Ford Ranger 2WD

1 Answer

2008 Ford Ranger heater blows cold air regardless of thermostat position.


Several things can cause a no heat condition. Try this - After the engine is warmed up turn on the heater and place you hand on the two heater hoses (CAUTION THEY WILL BE HOT)- if one is hotter than the other you may have a clogged heater core. The problem could also be as simple as the heat door not opening under the dash.

Oct 02, 2012 | 2008 Ford Ranger

1 Answer

I need a drawing for the drive belt on a 1993 ford ranger


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway.

CLICK
on the following LINK. It has several Belt Diagrams, one which will match your specific engine and options (AC/No AC, Power Steering, .etc) that you will need.

Let me know if this helped...
Again my apologies..


http://www.2carpros.com/car_repair_information/year/1993/make/ford/model/ranger/1993_ford_ranger_drive_belt_routing_diagram.htm

Feb 11, 2010 | 1993 Ford Ranger SuperCab

1 Answer

Need diagram for timing belt for 1997 ford ranger


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1997/make/ford/model/ranger/1997_ford_ranger_timing_belt_diagram_marks.htm

Oct 29, 2009 | 1997 Ford Ranger SuperCab

1 Answer

How do i turn off the check engine light on my 1994 ford ranger, in order to pass smog?


YOU CANT TURN OFF PCM WHEN IT SPOT A PROBLEM.YOU HAVE TO FIX PROBLEM.BECAUSE THE CHECK ENGINE WILL STAY ON UNTIL PROBLEM FIX. ITS AGAINST THE LAW TO TAMPER WITH EMISSIONS SYSTEM.BECAUSE OF SMOG AND POLLUTION LAWS..HAVE TRUCK SCAN TO SEE WHAT YOUR PCM CODE IS.COULD BE SOMETHING MINOR.

Sep 30, 2009 | 1994 Ford Ranger Supercab

2 Answers

2002 Ford Ranger that will not start


check the volts runing threw ur battery to the starter.check in several spots cables could be bad from inside.had that problem before.

Jun 29, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

2004 ford ranger with a 3.0 v-6 jumped time


jumping a car will not affect timing. if your timing is off then you have another problem. but if you want to reset timing anyway the easiest way is to disconnect the battery for about 5 mins.

Mar 25, 2009 | 2004 Ford Ranger

Not finding what you are looking for?
1997 Ford Ranger SuperCab Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...