Question about 1995 Mercury Grand Marquis

1 Answer

Fob programming How do I program a new fob for a 1995 mercury grand marquis?

Posted by on

  • Anonymous Mar 21, 2009

    i just bought this car and i need to get the key fob program

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Owners manual should explain

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the EATC reset codes?


your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot bypass it.

Jun 18, 2015 | 1999 Mercury Grand Marquis

1 Answer

How by pass for mercury grand marquis when you have busted chip key. I have the key that worked and now the chip looks ruined can try and start the car but the security wont let it stay turned over


your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot bypass it.

Jun 09, 2015 | Mercury Grand Marquis Cars & Trucks

1 Answer

Remote door lock key fob will not unlock doors or trunk 2003 mercury grand marquis


There are some testers for the FOB on the parts counter of most major autoparts stores. This way you can find out if its the FOB or the car. Some cars have an Electronic menu which controls the Alarm chirps and response to the FOB. What can happen is a Oil change Tech can erase the wrong setting for the oil change interval and disrupt the settings for other things.

Jan 30, 2014 | 2003 Mercury Grand Marquis

1 Answer

Automobile refuses to enter program mode


If the Ford dealer can't reprogram your fob, have him replace it and program the new one. If the "service writer" is, in fact, the service manager encourage that person to set aside the considered opinion and get on line to the factory. There may be an FSB for this issue. You may have to take this problem to another Ford products dealer if that is a feasible option.

Dec 12, 2013 | 1998 Mercury Grand Marquis

1 Answer

Remote on key fob wont unlock doors on 2001 merc marquis


Tested the batteries in it? Is it a new one? One that did not come with car? If so, it has to be programed so the car recognizes it, location for that is behind the glove box.

Mar 09, 2013 | 2000 Mercury Grand Marquis

1 Answer

My brother wrecked his 96 grand marquis ls and I was wondering if I could use his fob transmitter on my 96 grand marquis ls can this work?


You could try it, but I'm going to about 99.5% guaruntee it won't work, for programming reasons. HOWEVER, if you replace the computer/receiver unit out of your brother's Grand Marquis LS, it ought to work very well. Hope it works well!

Mar 08, 2012 | 1996 Mercury Grand Marquis

1 Answer

Got a 2003 mercury grand marquis which i bought and didnt come with a remote for the door locks. i have an extra remote from my 2003 ford expedition and need to know how to program it, any suggestions?


usually the truck and car fobs work on different signals. you can get inexpensive fobs on ebay, the car fob will have four buttons with a trunk release button.
once you have the correct fob, its pretty easy.
  • Just remember that you must also re-program your currently working remotes at this time also as if they are new since prior remotes are erased.
  • Max of 4 transmitters can be programmed.
Procedure:
  • Keep the driver's door open.
  • Electronically unlock the doors (Switch on door or working transmitter)
  • 2000-2006: Turn the ignition from OFF to RUN/ON 8 times within 10 seconds, with the eighth turn ending in RUN. If the module has successfully entered program mode, it will lock and then unlock all doors.
  • Within 20 seconds, press any button on an transmitter, and the doors will lock and then unlock to confirm that each transmitter has been programmed. Repeat this step for each transmitter.
  • NOTE: If the door locks do not respond for any transmitter, wait several seconds and press the button again.
  • To exit the programming mode:
    • Turn ignition to the OFF position.
    • Let the 20 seconds expire.
    • The maximum number of transmitters have been programmed.

Sep 04, 2010 | 2003 Mercury Grand Marquis

1 Answer

How to change the keypad code on a 2001 mercury grand marquis


look for the permanent code on the plastic card in the owner manual packet. Or, pay dealer to extract code from computer.

Keyless Entry Keypad Code Programming NOTE: The system only allows one code to be programmed.
  1. Enter the permanent factory keyless entry keypad code.
  1. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will erase the stored customer code . The door locks will lock, then unlock, confirming the code is erased. The existing code will not need to be erased to program new a code.
  1. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed.

Feb 08, 2010 | 2001 Mercury Grand Marquis

1 Answer

Car will not unlock.


To get inside the car .... Use the key in the lock cylinder, unlock the drivers door to get inside. You shouldn't have to reprogram the fob unless it or the keyless module was changed. There may be a blown fuse that supplies the keyless control module (check the owners manual for location). or wires that lead into the Drivers door may be damaged ... The keyless module is located inside the drivers door at the bottom behind the door panel ... do the unlock/lock and trunk release switches on the inside of the drivers door operate the locks and or trunk release? If so it is not the fuse ... and not the wires to it ... And it could be your BCM body control module, located in the dash board to right of your gas petal. Because the number entry keypad (code for that is on the inside of the right passenger trunk bracket arm) also doesn't work I assume it's not the key fobs themselves. Your 98 manual is correct for your car.

Apr 02, 2009 | 1998 Mercury Grand Marquis

Not finding what you are looking for?
1995 Mercury Grand Marquis Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...