Question about 2003 Honda CR-V
After the oil was changed the maintenance light stayed on. I did this before and the Honda dealership helped me and the trip button was the part of the solution. i tried the suggestion above and it did not work.
Posted on Sep 19, 2008
How torest oli indicator after oil change for crv 205
Posted on Jan 18, 2011
Man, that really saved me 30 bux, no kidding, toyota dealer have charged me that much just for resetting the maintenace required light because I did the oil change by myself.
Posted on Dec 31, 2008
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
Posted on Apr 13, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
on Dec 07, 2009 | Pontiac Grand Prix Cars & Trucks
Oct 04, 2013 | 2011 Dodge Charger
details will help.
Nov 28, 2012 | Cars & Trucks
Oct 22, 2012 | 2011 Dodge Charger
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the key off after the the light has finished flashing, then start the vehicle. If the CHANGE OIL SOON indictor comes back on, the engine oil life monitor has not reset. Repeat the procedure again. If the vehicle is equipped with the U20 option code, the vehicle as an oil life low indicator. The oil life low indicator shows an estimate of the oil's remaining useful life. When the oil life index is less than 10 percent, the display will show OIL LIFE LOW. To reset the oil life monitor, press and hold the MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to 99 percent.
Nov 28, 2010 | 2000 Oldsmobile Intrigue
Jun 08, 2010 | 1995 Cadillac Fleetwood
Jun 28, 2009 | 1998 Oldsmobile Intrigue
Jan 01, 2009 | 2004 Honda Odyssey
Sep 18, 2008 | 1999 Pontiac Grand Prix
963 people viewed this question
Usually answered in minutes!