Question about 2003 GMC Sierra

1 Answer

2001 gmc sierra power window

Driver side window is stuck in the down position, I hear a click in the switch only when I push the down position and nothing happens when I activate the up on the switch. I have also taken the switch out and with a votage tester It only registers the down and nothing in the up. Should I buy a new switch? Thank you, Dougrat

Posted by on

  • dougrat Aug 11, 2008

    Thank you very much, and for the fast reponce

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 232 Answers

YES THE SWITCH IS BAD SINCE IT RECEIVES THE MOST USE DURNING OPERATION ESPECIALLY THE DRIVERS DOOR REPLACE THE SWITCH AND IT SHOULD WORK FINE

Posted on Aug 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Gmc Sierra 5.3 litter SLT. Wire diagram for passanger side power window. No power to door.


Do the power door locks work for that door ? Does you vehicle have door courtesy lights , turn signals on the mirror ? If your vehicle has these other options an they work , you have power to the door . There is an electronic module inside the door ,called passenger door module ! where did you check for power at , the window switch ! These are computer controlled an you would only see a few volts when pushing the switch !

7

  1. Monitor the passenger front window status in the passenger door module inputs list.
  2. Activate the passenger power switch on the passenger door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 8
Go to Step 15

8

  1. Monitor the passenger front window status in the driver door module inputs list.
  2. Activate the passenger front power window switch on the driver door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 9
Go to Step 16
Operate the passenger front power window in the UP and DOWN directions from the master switch.
Does the passenger front power window operate properly from the master switch?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 5

4

  1. Install a scan tool.
  2. Monitor the window lockout data parameter in the driver door module inputs list.
  3. Activate the window lockout switch to both the On and OFF positions.
Does the window lockout data parameter change state appropriately?
Go to Step 5
Go to Step 16
Your best bet is to take this to dealer or a ASE certified repair shop.

Jun 14, 2015 | GMC Cars & Trucks

1 Answer

I have a 2000 gmc 1500. The switch on the passenger side door does not operate the window, up or down. Neither does the drivers side. But you can hear the relay click in the switch. This has been an on...


.
The passenger side is powered thru the driver's switch, so I would start with checking for power and ground at the driver's switch.
Could be the master switch or a problem in the harness between the driver's door and the cab. There may also be a relay for the windows in the engine compartment.

Aug 26, 2012 | 2000 GMC Sierra

1 Answer

Driver's window


The wiring diagrams for your 2003 GMC Sierra power window circuits are copyrighted material and cannot be posted here. However, I can describe the driver's power window circuit to you.

Battery voltage is provided to the driver's window (master) switch via the ORANGE wire at PIn #2 on the switch connector which comes from the 25 Amp Left Window Circuit breaker located in the fuse block on the left side of the dash.

There is a logic module located inside of the master switch which controls the "Auto Down" feature for the driver's window. When the switch is operated in either the "UP" or "DOWN" position, power and ground is supplied to the window lift motor via the BROWN wire (Pin #1, Connector 2) and the DARK BLUE wire (Pin #3, Connector 2) Thease wires will switch polarity dependin on whether the switch is commanding UP or DOWN.

The schematics show that the ground circuit for the driver's window motor is supplied internally by the driver's window switch module. It is most likely grounded inside the door panel itself - the schematics do not specify. To check for ground, you can test continuity to ground on BOTH the BROWN and the BLUE wires by back-probing them with the switch electrical connector plugged in and the window control switch in the NEUTRAL position. They should both have ground.

When the switch is operated, one will remain ground while the other switches to power.

Mar 24, 2012 | 2003 GMC Sierra

1 Answer

2001 Sierra. My driver side window stopped


The window motors are getting weak. If they are stuck down you can sometimes get them up by giving a firm hard hit on inside lower door panel while holding button up. This can get the windows up until you can get the window motor replaced. If you would like any further assistance feel free to ask, Thank you.

Apr 06, 2010 | 1999 GMC Sierra

1 Answer

The driver side window will not go back up?


there are multiple things that could cause this, check for power and ground at window motor. (door panel removal required). If power and ground good in up and down switch positions suspect window motor. If power and gound good in down position only, suspect window switch. Test with known good switch prior to replacement if possible as switch assembly is costly. Used switch panel o.k. but if you can afford new one go for it. If window motor bad go for new or remanufactured one as window motors are known to fail and used one may fail quickly.

Dec 25, 2009 | 2006 GMC Sierra

2 Answers

Window stuck in the down position


take it to a shop or take the door panel off and your probley gonna find a striped gear or the rubber thats protecting its track is bound up

Mar 20, 2009 | 2003 GMC Sierra 1500

1 Answer

2001 GMC Sierra Power Window problem


you should check the wire harness that goes from the door to the truck there must be a bad conection near by there somewhere in the harness hope this could help you.

Jan 05, 2009 | 2006 GMC Sierra

1 Answer

Power Window in a 2001 GMC Sierra Extended Cab


i just changed my unit on drivers side door man it was a pain well first it started off with not going at all i thought it was the motor but motor was good the wire was just getting hung up because the plastic piece broke on the track,so first disconnect motor from track and hit switch to see if it turns,and if not then replace motor,be careful not to loosen the cable.you almost need it exact tension for the track to work right.   

Sep 14, 2008 | 2001 GMC Sierra Crew Cab

Not finding what you are looking for?
2003 GMC Sierra Logo

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...