Question about 1983 Dodge Pickup

3 Answers

Need a color code for wiring a 4 pole towing kit

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

White - Ground
Yellow - Left Turn
Green - Right Turn
Brown - Running Lights

You can also view different wiring codes here for future use.

Hope this helps!

Posted on Nov 12, 2008

White is ground, yellow is left, green is right, brown is running lights

Posted on Aug 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 398 Answers

I don't know where to get the color code, but you can get yourself a cheap test light at your local parts house, then attach the wire of it to a good ground. Then turn left turn signal, and push the point of test light into each of the connections and when it lights up, makr left turn signal on a pice of tape and apply it to that waire, and so forth till you have identified each of the four wires. One of these wires will be ground so it won't light you up, The outlet has left turn, right turn, and tail lights. The stop lights come out on the turn signals.

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install trailer wiring kit for blinkers and stop lights for towbar for FG falcon sedan. thank you john


go to a tow bar fitting shop and get the harness for the trailer lights
it is a piggy back arrangement of a tail light assembly
from there wire in to the connectors as per the color code on the card that comes with the connections

Jul 15, 2016 | Cars & Trucks

1 Answer

Tail lights wiring


See link below. You need 4 pole kit.
http://www.etrailer.com/t1-1998_Ford_F-150+and+F-250+Light+Duty.htm

Jan 20, 2014 | Cars & Trucks

1 Answer

Have a 1998 f-150 factory tow plug 4 wire plug the brake and turnsignals work on truck but not on plug


follow harness back froom 4 pole connector, it goes into a square grey plug, if your laying on back looking up, it would be on the right frame rail about 12-16 inches in from rear bumper, make sure it is plugged in..if it is you need to trace wires for damage (could be pinched or broken)

hope this helps

Jay

Jun 06, 2011 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Ok i have a 95 ford aerostar van and i need to hook up a wiring harness to pull a trailer but i need to know the color code for the wiring in the van ????


I'm going to assume that you don't have the tow pkg and need the standard color codes. They are as follows.
left turn sig. yellow
right turn sig. dark green
bu light black w lt. green stripe
parking/running lt's brown w white stripe
ground black.
When splicing the wires I recommend you pick up a small plastic (waterproof) junction box to keep the connections clean
and it's easier to trace a short, any parts store should have this
in kit form for short money.

Sep 28, 2010 | Ford Aerostar Cars & Trucks

1 Answer

Hello, I have a 2000 GMC Jimmy that came with a rear hitch for towing. I need to install a brake controller and plug connector. I bought the 6-pole connector kit but I don't know what to buy other than the...


Hello Brenda, the tow package wire is tucked into the rear of your Jimmy near the hitch. The controller, unfortunately also needs to be installed in the cabin of your vehicle. I recommend that you call a few local repair shops, tell them what you have and what you need and shop for the best price. Regards, Joe

Feb 15, 2010 | 2000 GMC Jimmy

1 Answer

Suzuki GV towing electrics


You would need to purchase a 3-2 converter to wire a towing harness on there. The Vitara Function-Colors are as follows. a55c313.jpg

Oct 25, 2009 | 2007 Suzuki Grand Vitara 4WD

2 Answers

Need to wire tow bar into 1999 LT35


Hi ebrown80
You can splice into each wire in turn at the back of the lamps.No need to cut right through the origional loom completly. For a really good joint you should spot solder each connection and insulate all joints well. Tow bar sockets operate on a common earth, so no need to loop each one.
Check back of socket and you will find each pin has a number. 1---7
The wiring colours from the socket back to the loom are as follows
No 1 Pin--- Yellow Wire---Left Side Flasher
No 2 Pin--- Blue Wire------Fog Lamp.
No 3 Pin--- White Wire--- Earth. Must have good contact or nothing else will operate.
No 4 Pin----Green Wire--- Right Side Flasher.
No 5 Pin----Brown Wire---- Left Side Park Light
No 6 Pin----Red Wire-------Brake Lights
No 7 Pin----Black Wire----Right Side Park Light. Centre Pin.
I hope this helps you out
Best of Luck with it
John


Sep 13, 2009 | 2004 Volkswagen Eurovan

1 Answer

I need to wire my 4 runner


usually if you look under the rear bumper or behind one of the taillights you should already have the harness there for the setup just buy the plug and hook up the wires by going with same color

Jun 22, 2009 | 1996 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...