Cars & Trucks Logo

Related Topics:

Posted on May 01, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Have a 02 trail blazer .I replaced the battery, now it wont crank over. I reset the security light. Still no crank. All lights and guages work.Everything worked fine before. Any suggestions. Thanks, Matt

1 Answer

Tim Whalen

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,076 Answers
  • Posted on May 01, 2011
Tim Whalen
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 18, 2010
Answers
3076
Questions
0
Helped
824256
Points
9577

Have someone turn the ignition and tap on the starter, as it sounds like the starter is out. hope this helps Tim

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

I have a 2004 Trail Blazer with check engine light on. I disconnected the battery to reset the computer. Now the car runs rough and wont idle.

To begin with, you have to fix the problem then erase the trouble code in the computer to make the warning light stay off.
Disconnecting the battery erased the memory of the computer, and it has to relearn the base settings for the sensors.
Is the check engine light on now when the engine is running ?
0helpful
1answer

My chevy blazer wont start after having the security light on for a few days

If you left the security light on it probably killed your battery. You will need to jump start your vehicle or charge your battery as well as turn off your security light.
2helpful
1answer

How to reset change oil light on a 02 trail blazer lt

To reset the change oil light, do the following:

  1. Turn the ignition key to run with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. If the CHANGE ENG OIL light flashes for five seconds, the system is reset. If the light does not flash, repeat procedure.
2helpful
3answers

My 2001 oldsmobile alero will not start, I put gas and it would not crank over. Then the security light started flashing so I turned the key to the on poistion and was waiting 10 minutes and during that...

im just gonna take a stab in the dark here i understand that your security light is on try unlocking your door with your key sometimes you just need to reset the security. otherwise ive seen a security module go bad that may be preventing you from starting it.
1helpful
1answer

Wont start security light stays on

Body Control Module (BCM) on both counts. Find a shop in your town that specializes in electrical systems to test it. Beware, these can be intermittent problems, so make sure they keep it until the car does what you have observed. Expect to spend about $450 for the replacment. Dealers quoted me between $700 and $1,100 for the same repair. By the way, a new BCM will probably only last you about 12 months.
0helpful
2answers

02 Blazer wont Start, Passlock?

you might have tripped the security on it lock and unlock using the key in the driverside door
0helpful
2answers

2002 Chevy Blazer

take the pos cable off leave it off for a bit and see if it wont reset
4helpful
5answers

1999 chevy blazer won't start

First of all make sure all your battery connections are Clean and Tight. If they are and all your dash lights come on and its not starting But its cranking over Your anti theft alarm may have gotten activated. You may have to leave your Key in the On position for 20 minutes to reset the alarm. Not cranking just in the on position, Now if its not Cranking and your hearing a clicking sound it may be your starter. I have sometimes tapped on the stater with a deadblow hammer and had someone crank it over Making sure your in park foot on brake and being EXTREMLY Carefull that you are not going to run someone over. If that don't get you going Get back to me we can do some more trouble shooting. Get that thing going for you. Thanks, Bear001
Not finding what you are looking for?

137 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...