Question about 1996 Pontiac Grand Prix

3 Answers

Engine timing where are the timing marks on the cam

Posted by on

  • Anonymous Oct 18, 2008

    i need timing marks for 2000 protege

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Put the #1 plug on compression stroke and line up timing marks on the harmonic balancer

Posted on Sep 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Firing order is stamped on the intake manifold
ignition marks are on the crank pulley

Posted on Aug 25, 2008

1993 chevy blazer s10 how to time it

Posted on Aug 16, 2008

2 Suggested Answers

stevenhurc
  • 450 Answers

SOURCE: Looking for cambelt timing marks/ positions please, Twin cam engine Thanks Kevin

these bend valves if belt breaks while running
Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
Align the mark on the crankshaft gear with the
notch at the bottom of the rear timing belt cover.

Posted on Jun 29, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instruction changing timing belt 1979 Alfa Romeo Spider Veloz?


With Cam Caps loosened, FIRST loosen timing chain tensioner, press it in to loosen tension, Crank using ratchet to TDC (Top Dead Center on crank pully, (to keep from damage to pistons), align Exhaust Cam Timing Mark to mark on #1 Exhaust cam cover, then take up slack between Exhaust & Intake Cams (on top between the cams), Then align the Intake Cam to mark on #1 Cam Cap, "Now" loosen the 17mm bolt to tighten timing chain, rotate engine using rachet two times, reset TDC at the crank, and look at "Cam Timing Marks on both the Exhaust, and Intake Cams. If you did all this correctly the "Timing Marks" should be lined up so TDC,Exhaust, and Intake marks are all the same.

Oct 10, 2014 | 1979 Alfa Romeo

1 Answer

1.6 LITER TIMING MARKS


g16a or b
the cam cog mark is at 12pm matching the same mark
at the back 12pm tins at rear of cam cog.
this mark is TDC #4 firing, number four.
pick 8v or 16v engine.
http://www.fixkick.com/t-belt/tbelt-index.html#Tbelt-main

documented 3 ways, by page new page, by FSM and by instruction sheet that came with all new belts (GATES)

the cam cog has 2 false marks, do no use them
use all E marks. 16v and see 8v for its false marks too.
1995 had 2 engines, 2 EFI and 2 heads. as an option.
fact. G16A or B.

Jun 29, 2014 | 1995 Suzuki Sidekick

2 Answers

Timing marks 1993


spark or cam ?????????????????
and which engine, some cars have up to 10 choices.
most are about 3 or 4.
not of this can i guess.

May 29, 2014 | 1993 Pontiac Grand Prix

1 Answer

I have found the crankshaft marks but I cannot find marks to align the to over head cams on my car, the dohc are run from 1 wheel. I am trying to re-align the timing belt as i think they have gone off.


if it's a dual overhead cam then each head has two cams and two pully's, a single overhead cam engine has one cam and one pulley on each head. if the belt has more than 60,000 miles on it you should replace it. you need to find out if the engine is an interference engine or not to determine the level of damage caused if the belt has jumped or slipped. your overhead cam timing marks are usually on the cam faces and the backing plate behind the cam or sometimes there's two marks on the cam that you align with the surface of the head behind them. the first thing you need is a diagram of the belt routing and mark positions because timing marks are very important especially on an interference engine. starting or cranking an interference engine with the timing marks misaligned can bend all your valves or even punch holes in your pistons! so proper alignment is crucial, good luck.

Jan 02, 2011 | Mazda 323 Cars & Trucks

1 Answer

Can anyone please help me with pics or detailed desription on were the timing marks should be on a toyota d4 3s-fse engine, i need to know how to place the two cams and also the timing mark on the cam...


Welcome to FIxYa.com


Need the year and model and size as in liter engine in order to look this up for you to send pic and info. Engine number does not work in Alldata, Lee


Thank you for using FixYa.com

Regards, Lee Davidian

Dec 30, 2010 | Toyota RAV4 Cars & Trucks

1 Answer

I need to know the timing marks for the timing belt on a toyota highlander 2006 , v6 , 3.3 litre. the location of the cams, is it 3 oclock, 6 oclock, 12 oclock?


the timing marks for the cams are on the rear timing cover (behind the cam sprockets). They are very hard to see, especially the rear cam. Align the cam sprocket marks with rear timing cover. Because this engine is mounted at a 60 degree angle, you must use the marks. Rear cam should feel compression while front cam is free!!

Oct 13, 2010 | Toyota Highlander Cars & Trucks

1 Answer

I need a diagram of timing chain replacement Thank You


During most engine rebuilds, a completely new timing assembly should be installed. If wear exists on any component, replacement of the entire assembly is necessary. Wear in the chain, gears, or sprockets means a timing lag, which results in poor engine performance.
The timing chain or belt is generally installed with the gears in their correct positions. Before installing a new chain, soak it in oil.
OHC (Overhead Cam) Engines
Some OHC engines use a chain drive; others use a belt drive. Removing the cover on some OHC engines that have timing chains is more difficult, because the cover often fits between the oil pan and the cylinder head. There are special procedures for replacing cam timing components in these engines.
Before a chain repair job, perform a leakage test on non-freewheeling engines to check for bent valves, so that an accurate repair estimate can be made.
OHV (Overhead Valve) Pushrod Engines
On many OHV pushrod engines, the crankshaft sprocket is installed on the crankshaft nose and the crankshaft is rotated to position piston #1 at TDC. At this point, a mark stamped onto the crankshaft sprocket is pointing directly upward (toward the camshaft).
The camshaft sprocket is then temporarily bolted to the cam and used to rotate the cam until a mark stamped on the cam sprocket is pointing directly downward (toward the crankshaft). The sprocket is then removed from the cam (without allowing the cam to rotate).
The timing chain is looped over the cam gear, the mark on the cam gear is positioned directly downward, and the chain is looped around the crankshaft sprocket. When the cam sprocket is attached to the cam, the timing marks on the crank and cam sprockets should be pointing toward one another. NOTE THIS IS FOR 2WD 4.0

May 22, 2010 | 2005 Nissan Pathfinder

1 Answer

Timing marks for the Dodge 2.4L caravan, 2000


To align both sets of timing marks, turn engine crankshaft to the right with belt on cam and crank. Once you have done this the crankshaft alignment mark (on front of crankshaft gear) will line up with mark to the rear of gear on engine block.The two cam gear timing marks should be alines across from one another. The right cam gear is the intake side and the left side is the exhaust side. After removing the belt turn the exhaust cam down 1/2 notch. Timing mark on exhaust 1/2 notch down from the intake side. Install new belt and recheck everything to make sure it's all correct. Hope this will help you.

May 16, 2010 | 2000 Dodge Caravan

2 Answers

Cam Crankshaft timing


8 degrees before tdc

Mar 10, 2010 | 1983 Chevrolet Chevy

1 Answer

Timing belt marking


The timing marks are just above the cams at the "twelve o'clock position"

If necessary, align the timing marks.
NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley “I” mark and the right cam pulley on the “E” mark.

WARNING When aligning the timing marks, do not turn the timing gear counterclockwise. Damage to the engine will occur.

Oct 17, 2008 | 2000 Kia Sportage

Not finding what you are looking for?
1996 Pontiac Grand Prix Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...