Question about 2001 Isuzu Rodeo

1 Answer

With the lights off, when I press the brake, the dash lights and my parking lights come on. When I release the brake they go off. Is there some sort of relay that needs to be changed

Posted by on

1 Answer

No,you just have to check ground wiring.,could be very bad ,another things are bad conection on globes seats.Clean that truly and problem is solved.

cheers,Atom

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parking Brake and Anti-Lock Lights Don't turn off


When you release the parking brake (while keeping the handle pulled) reach down or use your foot and pull the parking brake pedal up . If the light goes off, the switch needs adjustment

Dec 13, 2013 | 1995 Dodge Dakota

1 Answer

2006 malibu wont come out of park no brake lights


Go under the dash and check the brake light switch, it should have 12 volts present at the 2 terminal connector at all times and 12 volts at both sides of the connector when the pedal is pressed, replace the connector the switch based on the test results, if no power at all check the fuse for the brake light circuit. The brake lights are what allows part to release, no lights locked in park

Oct 02, 2012 | 2006 Chevrolet Malibu

1 Answer

Shift lever lock won't release when brake pedal is


do the brake lights work? most of the time the problem is a broken wire at the brake light switch under the dash on the brake pedal. the ECM does not see the signal from the switch so it won't allow the car to shift from park.

Jul 19, 2011 | 1992 Lincoln Town Car

1 Answer

Unable to shift out of park upon starting. Pressing on brake petal upon shifting. Also noticing my brake lights are not coming on during this procedure. Owners manual mentioned about the gearshift anti...


Sounds like since the park lock and the brake lights are both inoperative, the faulty component would be the brake light switch which should be just above the brake pedal under the dash.

More info, let me know.

Charlie

Mar 12, 2011 | 1998 Ford Windstar

2 Answers

Where i can find the hand brake


There is no hand brake. It is foot operated. The pedal will be on the driver side kick panel, and the release handle is under the dash in the same area.

Feb 17, 2011 | 1998 Dodge Caravan

1 Answer

Coul not get shifter to do anything, Just stuck in park There was a littl button on top of shifter, tow truck driver popped it off, stuck a screwdriver in it, and I was able to get it out of park,,,is...


for the lights check the fuses under the dash and under the hood.it is unlikely more then one light would blow at the same time.the shifter should come out of gear when you press the brake.there is a switch that unlocks the shifter when the brake it pressed.switch may be bad.dash lights could also be a bad ignition switch.

Dec 28, 2010 | 1997 Toyota Corolla

4 Answers

Parking Brake Fault light is coming on? I reset the battery and it keeps coming on. It starts with the "apply parking brake" light and then when you take off, it goes to a parking brake fault? Please...


This is a common fault often caused by low battery voltage, before you start taking expensive actions with the park brake modules etc get your battery checked for 100% efficiency.
Hope this helps, good luck.

May 26, 2010 | 2003 Jaguar S-Type

1 Answer

Park brake light wont turn off


there is a switch at the top of the actual lever .This would be what I would look at.

Aug 28, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

Dash board parking brake and ABS lights stay


you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Apr 13, 2009 | 2002 Chevrolet Suburban 2500

1 Answer

Parking Brake Alarm


inset the key and switch on to position 2
Scroll through the warning display untill you get the service indicator apears
Press and hold the reset button on the left of the dash apnel for about 4 mins
You will be asked if you want to reset
Press anh hold the reset button again until you hear an audible warning
It should now show the new interval to a service

Jun 13, 2008 | 2008 Mercedes-Benz Mercedes Benz C Class

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...