Question about Fiat 124

1 Answer

03 punto when turn key starter motor clicks after few times motor gets warm is it easy to remove will it just need cleaning and refitting

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 272 Answers

You may as well get a reconditioned starter as the best cheap option. The main thing though is to disconnect the battery before tackling the removel of the starter motor. As for the removel of the starter motor, if you approach the job in a logical manner then it should not present too many problems. Look at the position of the starter motor and the securing bolts (these bolts will be tight) and look at the access you have to work in and remove the starter. Wire brush the threads of the bolts before refitting.

Posted on Nov 29, 2008

  • Frank Stephens
    Frank Stephens Dec 03, 2013

    how do I get to a starter motor on a Fiat dolblo cargo 2007 diesel please

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove a fiat punto drivers seat


Theres only 4 bolts that hold the seat down 5 or 6 mm allen key bolts Dont forget the wire under the seat for the air bag. Move the seat fully forward take out the rear bolts, move fully back and do the front. Refitting is as easy
.

Mar 10, 2015 | 2005 Fiat Punto 1.2

2 Answers

What is wrong. I only hear a click when turning the key. Battery is fine.


if as you say the battery is good,and all dash lights stay on bright when turning the key,your starter motor is faulty its either the solenoid which is the bit on the side of the starter that engages the starter when you turn the key, or the starter is jammed/stuck or worn out try hitting the starter with a hammer or if no room use a long bar rest the bar on the starter and hit the other end a few times if it then starts the motor was stuck, like wise if you have manual transmission put the car in gear let the hand/park brake off and rock the car forward and back a few times then try starting, eiter way you will need to repair or replace the starter motor

Feb 11, 2015 | Cars & Trucks

1 Answer

Fiat punto 1.2 replaced the starter motor still wont start solenoid just clicks


hi how ru ..i m from ireland ...i have fait punto 2001 i have problem statar moter how much i get pls tell me thanks very much

Feb 13, 2012 | 2001 Fiat Punto

1 Answer

Loud click from starter, starter wont turn.


Copper heavy duty contacts either side of starter motor armature within the motor body have worn to nothing and so no contact. No contact means no electricity to the starter motor coils means no turn over. You can buy a kit to replace the copper contacts for less than $10. It will take about 45 minutes to remove, clean, strip, replace and refit the starter motor.

Aug 30, 2010 | 1994 Toyota Camry

2 Answers

Intermittant starting


Hi this is a common problem with vehicles the age of yours its not a major problem its just a case of getting the starter motor replaced.

The clicking noise you hear is the selanoid on the starter moto not engaging properly.

Its best you change it sooner rather than later as you could find that it wont turn over at all.

If you are ever stuck anywhere and cant get the car to turn over then you can give the starter motor a couple of hard hits with a hammer or something hard this usually gets you out of trouble but get it changed as it would save all the stress of being broken down somewhere.

Oct 12, 2009 | 2000 Land Rover Discovery

1 Answer

1990 Ford Escort Some times Won't start. It's a


replace starter motor as its worn out but before you do remove battery terminals and wire brush them and clean up the terminal clamps .smear terminals with vaseline and refit clamps tight if no better replace starter motor

Oct 05, 2009 | 1998 Ford Escort

2 Answers

Dead battery? no sound except a small click when keyed turned on


What you describe is the classic symptom of a failed starter motor. It's not the motor itself, but the starter solenoid which has failed and as they're part of the starter motor assembly on modern vehicles you have to replace the complete starter motor.

It is an easy DIY job if you have the right tools (a 1/2" square drive socket set and a few spanners). Otherwise, expect to pay for half an hour's labour on top of whatever the starter costs.

Jul 02, 2009 | 2003 Land Rover Freelander

3 Answers

91 nissan terrano wont start


First things first; 1) check Terminals and make sure tight & clean 2) Make sure the batteries good 3) Make sure connection from battery to starter is secured 4) Make sure its not the starter clicking if it is change it. 5) Make sure starter relay is good located with all fuses!

Jun 16, 2009 | 1991 Nissan Pathfinder

2 Answers

My 03 impala wont start up ..wen i turn the key jus clickin noise


if the clicking is repeated with out you releasing the key then the battry is in need of charging or replacing, if its a one click each time then the starter motor is faulty.

May 13, 2009 | 2002 Chevrolet Impala

1 Answer

Daewoo Nubira Starter Motor Refit.


changed a clutch on one of these a few weeks ago and cant remember what i done ,old timers i think ?? not sure but its from below with a rear support bracket ,and a inlet manifold stay bar ,,,3/8 drive socket set with a knuckle and 3 long extension bars to get to top inside bolt as well i think ?? honestly cant remember ,i work on all makes and cant remember every one

Apr 14, 2009 | 1999 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Randy Ohler

Level 3 Expert

14584 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...