Question about 1988 Mazda 929

1 Answer

Started it up then it stoped now wont start no fuel in carby level. its a 1982 mazda 929 can u help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check the fuel filter , if it got to much smudge , change it
if this did not work , unscrew the upper top part of the carburator and check the leveling pad may be it is worn out preventing the fuel from entering the chamber , or you could just unscrew the inlet fuel hose and tap the retun one and blow some air in it , if ther air does not flow smoothly then you need to chande the locking needle controlled by the leveling pad

Posted on Oct 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 Mazda 929 checked battery and starter is good turns over but wont start?


problems include
cam/ crank sensor failures
immobilizer not operational
flat fob key battery
broken timing belt /chain
ecm problem
no fuel pressure
run the fault codes to find the area ans sensors at fault

Jan 08, 2017 | 1993 Mazda 929

1 Answer

I start my mazda 929 and when i hit the gas it dies


Any vehicle needs a good working fuel pressure fuel filter, When you put a load it needs more fuel, 3_17_2012_7_41_54_pm.jpg

Mar 17, 2012 | 1994 Mazda 929

1 Answer

My 91 929 mazda starts and runs fine in reverse but wont go into drive. ive checked transmission fluid and everything i can think of. is the transmission out or am i missing something?


so it physically wont go into drive, or you shift into drive, but wont move? did it act OK before this? sounds like trans is bad.

Sep 12, 2011 | 1991 Mazda 929

1 Answer

Have an 88 mazda 929 it wont start without jumper cables. It will stay running but if it is shut off it wont start again.


you need to have the battery tested, i think all that is wrong is the battery is bad.

Apr 26, 2011 | 1988 Mazda 929

1 Answer

My 1992 mazda 929 will start time to time it turns but it not getting the fire to start every time what should i do???


I'm having the same problem now with my 95 mazda 929, i'm being told it could be 1 of 3 things if the starter is good, it could be the neutral safety switch, starter relay, or the ignition switch going bad

May 21, 2010 | 1992 Mazda 929

1 Answer

Egines runs, but will not accellerate accellerater


They could be right. If possible, get an trouble code. That will tell you which sensor is the problem. it could be other sensors too.

Dec 29, 2009 | 1992 Mazda 929

1 Answer

Car wont start


The computer controls the injectors, obviously the injectors are not firing. Check that the computer is powered up; if it is, then the computer is bad

Jun 16, 2009 | 1988 Mazda 929

1 Answer

1982 mazda 929 MV motor, idles & runs perfect motor is spot on but! it won't stop surging when driven in forward gears 1,2 &3. Have replaced points/distributor/coil/fuel pump/filter but still it...


Sounds like the ECU is struggling to maintain a constant speed when the throttle is open on cretain spots. Does this vehicle have a TPS (throttle position sensor)? If it does then it probably needs to be put on a scope and properly adjusted for continuity. Or could be that some other factory settings have been tampered with on some smog components. Either case, its most likely your air/fuel ratio.

Jul 19, 2008 | 1994 Mazda 929

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

69014 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...