Question about 2000 Chevrolet Corvette

1 Answer

Turn signal/ Emergency Flasher

Turn signals & emergency flaher intermittently not working. Could the emergency flasher switch be the cause od the problem?

Posted by on

  • rhpjr08 Jan 16, 2009

    Need to know were the hazard/turn signal switch is located in my 2000 Corvette

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes happens all the time.  I've had to replace mine like many other vette owners.  Order it from gmpartsdirect.com and search vette forums for how to replace hazard switch.  You should find the directions on how to replace it without taking apart the whole dash.  Not very diffiecult.

Posted on Sep 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

When i turn the signal lights for left or right turn the emergency flasher start flashing all four turn signal lights. the emergency flashers work ok


ck your turn signal switch wiring connector because it is more than likely has been hot and melted some connections.

Oct 18, 2014 | 2000 Kia Sportage

1 Answer

1970 beetle how to fix flashers


1. Do your emergency flashers work?
Check all your fuses, make sure they are getting a good contact.
If your emergency flashers work, it may be a faulty turn signal switch.
If your emergency flashers work that will eliminate the flasher. The one flasher works both turn and emergency signals.

Jul 05, 2014 | Volkswagen Beetle Cars & Trucks

1 Answer

My turn signal flashers are all out but emergency blinkers work, I replaced the flasher relay switch but it did not help


try to test turn signal switch, which its the live wire is not sending signal to the flasher.

Mar 07, 2013 | 1990 Buick Century

1 Answer

Turning signals will work only when emergency flasher switch is set to the on position /also the emergency flashers do not work at all/


Check the flasher unit, switch the emergency flasher with signal flasher see if emergency will work. Possibly they run off same "double flasher", probably replace it.

Sep 17, 2009 | 1996 Ford Thunderbird LX

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

2 Answers

No turn signals or emergency blinkers


Sounds like a multifunction switch, work the emergency flasher button up and down a few times, then attempt to work the turn signals if the signals work then you will need a multifunction switch.

Apr 30, 2009 | 1997 Ford Crown Victoria

1 Answer

1995 F150 the turn signals do not work, but


Look in the fuse panel and the turn signal flasher is the big round most likely yellow or silver in the corner of fuse panel. The emergency flasher is in the back side of fuse panel right directly behind the turn signal flasher.
Remove the emergency flasher and install it in place of the turn signal flasher and see if this corrects the problem and if so get a new flasher. If this does not correct it problem will most likely be the multi-function switch.

Mar 13, 2009 | 1984 Ford F 150

2 Answers

1995 GMC Jimmy signal light function not working


ASE mechanic here:
trying checking the turn signal flasher, the fuses, if all work fine, most likely cause is the multi-function switch.

Jan 26, 2009 | 1995 GMC Jimmy

Not finding what you are looking for?
2000 Chevrolet Corvette Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...