Re: Speedometer reads in KPH, can this be changed?
Go into setup menu in the DIC til you see unit measure! Then select unit measure and everything will be back to normal. One is for kph and celcius, Liter/100km, fuel liter used etc and the other one is for mph, farhenheits, mpg, fuel gallon used etc.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pete, is there any chance your speedometer is in Kph and you think it is in Mph. 60 kph = approx. 37 mph.
If not, I would say you need to replace speedometer.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
most have a dial or button on the cluster , for mph and kph , if its a digital dash the owners manual should have it in appendix under speedometer , last resort call the dealer with youre vin number located on left hand corner of dashboard behind windshield
If it's digital there's a button somewhere I'm sure. However if it's a printed read out, then the cluster has to be changed over...however it should also read both. This is a common issue for service men bringing vehicles back from Europe as did I in 1998. Hope this helps !
From the sounds of it the vehicle computer was switched from mph to kph. You should be able to change this back using the driver information center located above your stereo under your settings options. 40mph=64.4 kph. If you have your owners manual available may want to consult that how to completely change it back.
THE SPEEDOMETER OR THE ODOMETER? THE SPEEDO TELLS YOU HOW FAST YOU ARE GOING AND ODOMETER READS THE MILAGE OR KILOMETERS TRAVELED.
IF YOU MEAN THE ODOMETER THEN THE CAR IS PROBABLY FROM CANADA AND CAN NOT BE CHANGED. I'VE RUN INTO THIS BEING NEAR THE CANADIAN BORDER.
I AM NOT SHURE IF YOU CAN CHANGE OVER TO A NEW CLUSTER (INSTRUMENT PANEL) LEGALLY OR NOT. CALL YOUR LOCAL D.M.V. AND THEY CAN TELL YOU. THE MILAGE WOULD HAVE TO BE CONVERTED AND THEN THE MILAGE STORED IN THE ENGINE/TRANS. COMPUTER WOULD NOT MATCH THE ODOMETER READING. SORRY HOPE YOU CAN FIND A SOLUTION IF YOU NEED TO.
IF YOU MEAN THE SPEEDOMETER THE THERE IS A ENGLISH/METRIC BUTTON TO PUSH TO CHANGE THE DISPLAY. GOOD LUCK..