Question about 2004 Hyundai Santa Fe

1 Answer

02 santa fe tcs & abs lights on

I have an 02 santa fe with the tcs & abs lights on. the brakes are spongy & must be applied deep to get any response. chilton has not released a repair manual. can this be fixed without taking it to the shop???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

Haynes has one id try bleeding the brakes or replace them an bleed

Posted on Oct 03, 2009

6 Suggested Answers

ghost45
  • 1280 Answers

SOURCE: Recently, the ABS and TCS lights come on and stay

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.... OR ... Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 03, 2009

  • 148 Answers

SOURCE: 2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Posted on Jul 15, 2009

SOURCE: I have a 05' Hyundai Santa Fe.The ABS light & TCS light.

dear friend-it sounds like one of the sensors(wheel)is faulty or one pne of the turnwheels came loose.

Posted on Jul 27, 2009

  • 135 Answers

SOURCE: 2002 Hyundai Santa Fe = ABS, TCS lights come on.

Probably bad wheel bearing

Posted on Aug 05, 2009

  • 3 Answers

SOURCE: 2002 hyundai santa fe ABS braking system engages

you have a weak abs sensor use an ohm meter and compare it with the others and check the frtwires for cracks

Posted on Oct 15, 2010

Mr BrokRench
  • 1623 Answers

SOURCE: 2004 Santa Fe can't pull a fault code for ABS

It takes a special scanner to retrive this code, a generic handheld won't get it,

Posted on Jul 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dashboard lights (battery emergency brake light & air bags) are flashing on my dashboard while driving but go out when I come to a stop on my 2001 santa fe


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 17, 2012 | 2001 Hyundai Santa Fe

1 Answer

I just replaced my brake pads on my 2005 hyundai Santa fe. Immediately, noticed that i have to almost floored it in order to stop. Took it back to the mechanic and checked the brake fluids and for air....


brakes ok i think you mechnaic forgot to pump the brake pedal up after changing the pads ,as for the abs light i think he may have damaged a wire somewhere that goes to a sensor ,you sure this person is a mechanic ??

Jul 02, 2011 | 2004 Hyundai Santa Fe

1 Answer

2006 Hyundai Santa Fe - ABS/TCS & Brake problem. 96,000kms.


if your peddle is pulsing change the rotors they got to hot and warped do not get dealer rotors buy one after market with holes in them they cool better

Aug 17, 2009 | 2006 Hyundai Santa Fe

2 Answers

2003 Hyundai Santa Fe ABS light is on along with TCS light


you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Jul 14, 2009 | 2003 Hyundai Santa Fe

1 Answer

TCS ABS lights on & alternator not fully charging


Alt shoud be putting out 14 to 15.2 volts.

Jul 02, 2009 | 2002 Hyundai Santa Fe

1 Answer

TCS ans ABS and Brake light on 2005 hyundai santa fe


There is a senor that is in the caliper they are pricey and annoying a way to try to see if its it make a soltuion of salt water, heavy salt soak the whole caliper reall good i mean real good with start the veh. back up and down the drive way then rinse it off throughly and see what thew the lights do, do this f or ll sides, make sure you throughly rinse after and dont let the salt water saty on for mor e than 10 mins. But this will fluse the senosr and clean it...Sometime resets them,,,,Sounds crazy but it works if that is the problem. Try this and let me know fro m there

May 18, 2009 | 2002 Hyundai Santa Fe

1 Answer

Abs AND tcs lights are on.


YOU MAY NEED TO TAKE IT TO THE DEALER FOR AREPROGRAMING OF THE ABS SYSTEM

Feb 13, 2009 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...