Question about Audi TT

1 Answer

Found two headlight torx head screws, can't find the lower one

Posted by on

  • Anonymous Feb 25, 2009

    same problem here

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The third torx screw is behind the front grile.

I just removed mine from my car.

Posted on Nov 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where can I buy T20 Torx bolts that attach grill (4) and headlights (1 needed) for a 2003 Jeep Liberty


Have you tried a auto parts store, Advance Auto, Auto zone ETC. God-Bless!

Jun 02, 2016 | 2003 Jeep Liberty

1 Answer

Trying to adjust headlights on a 2000 Plymouth Grand Voyager


On drivers side, Look for holes in rad support above headlights and you'll see a bubble level. Behind light housing you'll find small hex, or torx head screw just left and behind bubble level area. That's Horizontal adjustment. Now go over to right about 3 " from bubble level,just past where headlight mount is attached and look down hole for another hex, or torx screw head. That's vertical adjustment. Passenger side location will be obvious after finding drivers side adjustments.

Sep 19, 2010 | 2000 Plymouth Grand Voyager

1 Answer

How do I access the low beam headlight bulb on a 1995 Olds Cutlass Ciera?


remove side marker lamp 3 screws #15 torx head
remove grill 5 #15 torx head screws
now remove the headlamp 4 10 milimeter bolts

Jun 02, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

I want to replace the headlight and the owners


It's talking about the headlamp bezel, the bezel is a band that goes around the parimeter of the lamps and holds it in the "headlight bucket". The screws may be a T15 Torx, if it looks like an allen head but an allen won't fit try a Torx driver.

May 27, 2010 | 1998 Chevrolet Suburban

1 Answer

VW SHARAN 02. i need to remove the headlights so i can straighten the cap covering the bulb and also the light tilter is not working ( the switch does not seem to tilt the beams when i turn the dial, this...


  1. In order to remove the headlights, you need to remove the front bumper cover.
  2. Place the front of the car on jack stands.
  3. You will need to remove the screws on each side in the fender wells on the back side that screw into the bumper. these are torx screw head type.
  4. On the underside of the car there are larger torx type screws that attach the bumper cover to the body. They need to be removed.
  5. You will need to remove the grill that has the VW symbol on it. Under the grill there is more torx type screws to remove. Inorder to remove the grill you need to get the hood release rod off as well.
  6. With the bumper cover removed, there are four torx type screws holding the headlight in place. Once removed you can unplug them and the head light is off.

Jan 25, 2010 | 2002 Volkswagen Jetta TDI

1 Answer

How do you replace the headlight on a1984 Oldsmobile 2-door Cutlass Supreme? I can't see what retains the head lamp assembly but it appears that the external plastic frame must be removed first and it's...


That is exactly what holds your light in, when you say torx driver I am assuming that you are using a multi-driver, you might need a nice slim torx screw driver to get into the recession to get the screws out, a magnetic one will be the best to reinstall.

Dec 09, 2009 | 1984 Oldsmobile Cutlass Calais

2 Answers

Headlight adjustment screws


They will probably be inset adjacent to the headlight. You'll find a horizontal and a vertical adjusting screw, with small springs behind them. Some cars come equipped with a small level (like a carpenter's level) attached to the top of the headlight under the hood to help you get the correct adjustment.

Nov 12, 2009 | 1992 Dodge Dakota

1 Answer

How do you remove the headlights on a 2001 A4 to change the main globe


There are torx screws holding it in, two at the front top on the radiator support, and two on each side down low inside, you need a LONG torx to reach them..DON'T remove the two lower screws, just loosen enought to pull the light assembly out.

Jul 13, 2009 | 2002 Audi A4

1 Answer

How do I adjust the head lamps on 2007 equinox


look at the tops of the headlights there are 2 torx screw in the top one opn each side of the light tom move them just simply get a torx and rotate the screw thats it/ Please rate my response thank you very much

Jan 31, 2009 | 2008 Chevrolet Equinox

1 Answer

Head lights


Open the hood and get a bright flashlight handy (even in daylight) it will make them easier to spot. Look on top of the headlight assembly 1 st for the left/right screw(s) and then straight into the assembly from the front for the left/right scew(s). The adjustments are not always clearly marked but you will usually see a flathead, phillips. or sometimes a torx head adjustment screw. The front adjustments tune the headlights up/down - the top adjust left/right. Good Luck!!! P.S. the best way to adjust them once you have found the screws is to park about 5 feet away from a garage door at night. Begin adjustments against the beams on the door. They should be directed center left/right and slightly downward up/down.

Sep 25, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...