Question about 2001 Jeep Grand Cherokee

2 Answers

Won't start. changed fuelpump & cam sensor - 2001 Jeep Grand Cherokee

Posted by on

  • hooski2002 Aug 16, 2008

    Have a 2000 Jeep Grand Cherokee that has had a slow start for 2 years. Took it to the dealer and they put in a new ignition and checked the starter. Picked it up from dealer and it still had a slow start. Took it back in to them and they checked it over again and said that they could not find anything wrong with it .They said that I would have to wait for it to completely go out before they can find it and fix it. Recently it turned over but no start. It finally started after 2 weeks and I drove it for a day with just a slow start, (back to the beginning) I put gas in it before I parked it for the night. The next morning it would turn over again but no start again and has remained that way for 3 weeks. HELP!

  • Steve Allison
    Steve Allison May 11, 2010

    When posting a request for help, it is a good idea to mention what else you have looked at.

    For example; do you have any spark?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try cleaning the throttle body with some carburator cleaning..after cleaning mine..it runs and starts smooth.

Posted on Aug 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

How so does it crank over? If it just starts and dies a bit after the security system is enabled
Lock all the doors and unlock them with the key this tells the security computer you have the correct key.
you need to check for spark and fuel pressure MUST be at least 45 PSI and you need to know if you have fuel injector control
www.aceautomotive1.com

Posted on Aug 10, 2008

  • Randy Harkins
    Randy Harkins Aug 15, 2008

    Does it run now I sure hope so it's my absolute pleasure to help you please let me know thanks,Randy

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge intrepid .sometimes will crank and then won't .changed crank sensor,cam sensor, fuelpump and computer.any ideas


it is cranking ( turning over ) but not starting
check the cam shaft position sensor wires . immobilizer operation

Apr 16, 2017 | Dodge Cars & Trucks

1 Answer

01 f150 4.2 will turn over but wont start


Check Inertia sensor. This cuts off power to fuelpump. It has a reset button and is usually behind the front floor kickpanels.

Feb 27, 2014 | Ford Cars & Trucks

1 Answer

4x4 v8 1998 dodge truck won't start


well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

Feb 21, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

My cam sensor won't work


You had the cam sensor back probed & scoped
& it tested bad?

Or you just got a code

Codes do not tell you what is wrong or to
replace something

Nov 24, 2012 | 1998 Dodge Grand Caravan

1 Answer

My 1996 F450 7.3 diesel engine crank over but won't start, I have change the cam sensor, but still doesn't start


First, check the condition and operation of the following:

1) Spark plugs, leads and coil(s)
2) Air filter
3) Fuel filter and pump operation.

Nov 18, 2012 | Ford Cars & Trucks

1 Answer

1988 ford f150 won't stay running


I You can get free fusebox layouts at Autozone.com by registering your vehicle.

Try changing the fuel filter. May be too much resistence is causing the fuelpumps to trip their limit switches.

If you have not used a scanner, someone may have one for this old style system. An bad O2 sensor can adjust the fuel mix too lean to run.

If you have a fuelpressure regulator, it may only cycle once for starting and then fail to trigger the fuelpump a second time to restart the fuelpump.

Check with FordF150blog.com or some of the 4x4 truck offroad sites for some pretty good info about problems like yours in the Backwoods and how to fix them.

I hope my solution is helpful.

Aug 10, 2012 | Cars & Trucks

2 Answers

My car shuts off & stalls sometimes when i'm driving


cheapest and easiest answer is cam shaft sensor its located on top of engine normally on the timing belt side, hope this helps ( rate me thanks )

Sep 04, 2010 | 1996 Nissan Maxima

1 Answer

Car wont start


being 94' im sure it has high miles, cam and crank sensor common to fail over time do to wear and heat exposure. check the basic, make sure you getting fuel and sparks. fuel pump only work as long the engine is turning over due to the crank sensor sense the flywheel turning. crank sensor may be faulty. no sparks, check coil make sure is good and putting out 12v, auto zone can test it for free. good coil, than check cam sensor, cam sensor senses the cam turning and tell the ecu to tell the coil to disperse the sparks to the plugs. cam and crank sensors, there no way of testing it but replacing the unit unless you have the special equipment to test it; both is fairly cheap to replace, check ebay.

Oct 24, 2009 | 1994 Mazda MX-6

1 Answer

New fuelpump & relay, fuelpump want come on.


check all those item again, especially the crank sensor, check the fuel pump by adding 12v to it, make sure its good. tun on key, make sure your getting 12v from fuel pump wire

Jul 30, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...