Question about Honda del Sol

1 Answer

Wheel bearings need replaced - del Sol Honda Cars & Trucks

Posted by on

  • hchesse Jan 21, 2009

    98000 miles


    Front hub bearings humming at speed like crazy
    What do I do?
    Is this normal?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Ok on that car its so much cheaper and easier to just go to a wrecking yard and buy two new steering knuckles with the hubs in them and put them on Honda wheel bearings are a bit hard to replace you need a press and kow how to do it you will save so much time and money the used steering knuckle way you'll be surprised. If this information was helpful please give me a good rating and by all meand contact me if you need further help.
www.aceautomotive1.com
fixincars@yahoo.com

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace front wheel bearing 2009 Honda accord


Hello James.
I don't wish to insult you but replacing the front wheel bearing of a front wheel drive vehicle requires the sort of tool kit and skill level that if you need to ask how you do you do it you are unlikely to possess.

By the time a wheel bearing needs replacing it has been subjected to years of heat, cold and moisture and removing the bearing from the hub can be fraught with difficulties not covered by an average repair manual, difficulties which needs experience and equipment to overcome.
As if that isn't bad enough the work needed to clean and prepare the hub to accept the new bearing needs the realisation the assembly is a piece of precision equipment requiring very high standards if the replacement bearing is to have the best chance of returning a good life-span. This is also true of actually fitting the new bearing where if pressure isn't applied correctly it can be ruined in a second or have it's working life seriously shortened.

I suggest you ask an experienced someone else to fit the bearing this time while you observe.

Feb 08, 2015 | 2009 Honda Accord

1 Answer

How do i replace a wheel hub and wheel bearings on my 1997 Ford F250 Econoline?


you need to remove wheel brake caliper & caliper bracket. remove brake rotor . you will be at the hub bearing now. look on back of knucke there will be 4 bolts. remove bolts the tap on flang to pop out bearing, if truck has abs make sure you un plug sensor wire plug will be under rear part of wheel well

Jul 14, 2012 | Cars & Trucks

1 Answer

Front wheel bearings need replacement. At what cost?


wheel bearings are'nt that expensive. i would buy 4 bearings and replace all four on the truck. the cost of two or four labour should be the same. a mechanic should have it done for you. buy the bearings youself and let the mechanic do it for you. good luck

May 06, 2010 | 1999 GMC Suburban

1 Answer

2wd front wheel need to replace bearings or hub assembly which is best


A Front Wheel Drive Vehicle Can Have Two Types Of Rear Wheel Bearings: Serviceable Bearings, Or Nonserviceable, Sealed Bearings. When Sealed Bearings Fail, The Bolts Holding The Bearing And Hub To The Axel Or Control Arm Must Be Removed. When Installing The New Bearing Assembly, Torque The Bolts To Specifications.Some Manufacturers require The Use Of New Fasteners When Rear Bearings And Hubs Are Replaced.

When A Serviceable Wheel Bearing Is Used, The Bearing Can Be Disassembled And Packed With Grease.It Is Serviced Like A Front Wheel Bearing On A Rear-wheel-Drive-Car.

Apr 09, 2010 | 2003 Ford Explorer Sport Trac

1 Answer

Left wheel bearing replaced no alignment done.


the car does not need to be aligned after a wheel bearing replacement. it is a good idea to get this done every 6 months depending on driving habits though. good maintenance.

Feb 18, 2010 | 2004 Mazda 6

1 Answer

I get a vibration as im driving possible from the rear wheel


a) Wheel Balance.
b) Wheel Alignment
c) Wheel Bearing.
My best guess is a wheel bearing needing replacement. If there is only noise, then MAYBE repacking of bearings. However with vibrations, the wheel bearing(s) need to be replaced. Make sure you replace both the bearing and races as a set.
Let me know if this helped or if you need additional help.

Dec 09, 2009 | 1992 Plymouth Acclaim

3 Answers

Driver side wheel makes noise, it gets more rapid as I go faster


There are a few reasons why a wheel will make noise when it's rotating. The most serious would be a bad wheel bearing. I would have the front wheel bearings checked, and if the driver's side needs replacement, I recommend that you have the passenger side replaced as well.
Other less serious causes for a noise at the wheel can be a small stone stuck inside a hub cap or a stone lodged in the tire tread.

Jul 29, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

Wheel bearing replacement left front wheel Hello Everyone, I may need to replace the wheel bearing on my right front wheel of my Corolla wagon. How can I know for sure? And how can I find out how to do...


Diagnosing the bearings can be tricky depending on severity of wear. Typically - drone noise at highway speeds, squeeling, clicking or grinding noises at low speeds that reduce during braking, or pull off the wheel and brake assembly and check the bearing for slack or smoothness of rotation by hand. While doing this, check the brake assembly thoroughly - generally a more likely culprit of wheel noise.

Wheel bearing replacement is not for the novice backyard mech. - you will need pullers, press, etc. If you can get a rebuilt assembly - much easier.

Apr 23, 2009 | 1996 Toyota Corolla

2 Answers

Think front wheel bearing is going bad on my 2001 ford windstar van how to tell


Jack up the wheel that may have the bad wheel bearing and position your left or right hand at the top of the wheel and the other hand at the bottom of the wheel and rock from top to bottom if there is over 1 cm of play your wheel bearing needs to be replaced and if there is excesive play from left to right your rack ends need to be gresed if the have a grease nipple or replaced hope i was some help

Jul 28, 2008 | 2000 Ford Focus

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...