Question about 2001 Ford Explorer Sport

2 Answers

Turn signals blinking fast and have no rear lamp, even after changing bulb

Have tried changing the bulb did not fix the problem, any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the exact same problem. It was a turn signal switch in the turn signal itself that went bad. Cost 120.00 to fix by a licensed mechanic.

Posted on Sep 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Which bulg is just coming On but not blinking? that bulb is either bad or its GROUND IS BAD make sure the socket is nice and clean and find the ground wire and make sure its connected to a good clean ground if you have to make a new ground wire and connect it .
if you find this information helpful please give me a good rating and by all means contact me if you have any questions
www.aceautomotive1.com

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1996 Mercury Sable headlights won't turn on. Bulbs replaced. Fuses check. Relay replaced. What else can I check? Pulling the multifunction stick on steering column offers high beams only.


I'm going to be a bad man here but... you might want to change the headlight switch itself. Had that happen before and that was the fix.

Oct 17, 2016 | Mercury Cars & Trucks

2 Answers

LOst dash lights changed fuse unhooked battery any suggestions


Check dimmer switch make sure that it is on then check for power on fuse with a test light. If you have power go back to dimmer switch and check for power and ground. If all is good most likely a head light switch. Could be bulbs but not likely.

Jan 15, 2015 | 2005 Kia Amanti

1 Answer

What can we do to fix our 96 buick regal?


Probably a corroded socket where the bulb plugs in.

Aug 16, 2014 | Cars & Trucks

1 Answer

All of the lights are working except the tail lights. We had just changed the brake light and then none of the lights were working. We changed a fuse and now all of the lights work except for the tail...


Make sure you are using the correct bulb for this vehicle. (i.e. 1057, 1157 etc). Also, usually the bulbs go in only one way - in that hey make one nub bigger than another - however, some bulbs will go in both ways, but will not have a good contact point when inserted one of the two ways. Try rotating the bulbs and ensure they have a good connection. If they are the push in bulbs, replace any relays as well as any fuses again (do not use a larger amp fuse then specified or suggested).
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

Jan 20, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

CHANGED BULB IN TAIL LIGHT STILL DOESN'T WORK


if it is only one side that does not work and the bulb is good then it is probably a bad light socket or a bad ground wire. if both tail lights are out then it is more likely to be a fuse or a bad relay.

Feb 12, 2010 | 2003 Ford Explorer

2 Answers

Car headlight bulb keeps burning out!


Must have a bad seal or broken/chipped lens allowing moisture to build up inside headlight.

Jan 16, 2010 | 2004 Hyundai Elantra

2 Answers

Volvo S80 - Low beam out - Changed bulb & fuses


you need to check and see if there is power to the light that is out , because they work on the same circut , look for a bad wire ?

May 09, 2009 | 2000 Volvo S80

1 Answer

Brake light not working


Assuming you tried a new bulb(bulbs can look ok even though they are broken) i would suggest you locate the fuse for that light and check/renew

Mar 07, 2009 | 1997 Toyota Previa

1 Answer

REAR TURN INDICATOR WILL QUIT WORKING


if you have done all of this check out the socket with a 12- volt tested and the wire behind the socket to see if you have power coming to it or a loose wire or a broken wire.

Feb 14, 2009 | 2001 Ford Expedition

2 Answers

1998 Honda Accord


do your car have factory radio if not you got to see the wires

Feb 08, 2009 | 2000 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...