Question about 1995 Chevrolet S-10 CA Edition

1 Answer

The blend doors on a chevy s10 are not working. air is coming out of the defrosters and the floor vents

Posted by on

  • DMAYEADS Apr 21, 2009

    Mine is similar, but tends to switch to defrost when I put my foot in it. Sometimes it will stay in defrost, then later will switch to vents or floor

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem on my 95 s10. there is most likely a vacuum line that came loose under the hood near the firewall on the driver side. that solved my problem.

Posted on Aug 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

87 chevy caprice A/C vent not opening


Depends on what is clicking. The engine vac opens blend doors under the dash. It could be one of the vac pots or a blend door is sticking. Normally the hissing noise means you have a leak, but a leak usually does not fix itself.

May 18, 2013 | Chevrolet Cars & Trucks

1 Answer

Cannot getr air to come throw the dash vents


Usually a faulty blend door under the dash. The blend doors direct air thru the heater core and the vents.

Jan 12, 2013 | 2002 GMC Sierra 2500HD

1 Answer

2002 Chevy S10 blows warm air on all settings unless it is set for the vents I replaced the thermostat as had code for bad thermostat


You may have a problem with the blend door motors on the side of the heater box. As one other person said: "Look at the controls right above the driver's feet area toward the heater box". If they are moving properly all the way, when you move the selectors on the dash, then there may be a problem inside the heater box. If they don't move all the way, then the blend door motors may be bad or binding. Another common problem on these is the control head on the dash not working properly. The control head can be diagnosed with a scanner that can read codes for it. Hope this helps out.

Oct 28, 2012 | 2002 Chevrolet S-10

1 Answer

Cold air comes out the defrost vent all the time. 1994 buick le sabre. no air comes out the front registers.


The most common cause is the blend door actuator. It's the door that diverts air between the floor, vents, and defroster. Sometimes the part will get stuck in 1 position. Some cars have cable driven blend doors, others are electronic.

Jun 02, 2011 | 1994 Buick LeSabre

1 Answer

I have a 97 chevy k2500 the fan works, heat and ac works, the floor vents and dash vents work but cant get any air to blow out of the defrost vents. help i have replaced the control panel, still have...


Your vehicle uses electronically controlled blend doors to direct th air flow from defrost to vent and to the floor . If the door motor is bad then it will stay at a fixed position so you will not get the air to flow out the defrost ducts. There are at least two of these one for air blend and one for fresh air. They are located on the passenger side usually under the plastic cover and have a wire harness that plug in and are usually shaped like a piece of pie.

Mar 03, 2011 | 1997 Chevrolet K2500

2 Answers

My 1997 C1500 Chevy vent issue


Your blend door is probibly not moving all the way to vent position.If you put it on vent there is probibly air blowing on floor or defrost.It may also be opening just a fraction and causing back pressure on the blower motor causing the noise.Is there any difference in outside air or recirculate?

Mar 09, 2010 | 1997 Chevrolet C1500

1 Answer

What is a blender/ it is suposed to a part of the heater area


The "blender" would refer to the blend actuators that change the flow of air from floor to vent to defrost or combinations. Properly working blend doors will allow you to direct air to the dash vents, the floor, the defroster, the floor and defroster or the floor and dash vents. If it is not working the heater will still work but you will hae no control oer where the air flows.

Dec 19, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Blend door not working.


The bleed door controls air temp not where it comes out, dash, floor, defroster, this is most likely a mode control switch problem, that switch is on the ac control head.

Sep 23, 2008 | 2001 Dodge Ram 3500 Truck

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...