Question about Chevrolet Chevy
If you are trying to replace the tube, it is attached by one bolt that holds the transmission to the engine. This bolt is a 9/16 bolt that screws into the bock of the block though the trans housing at the top. You can see the tab on the side of the tube. Remove the bolt. Then give it a twist and pull up. There is a rubber sleeve or an o-ring around the tube that seals the tube. Make sure you have a pan under the trans because you will loose a lot of fluid. Put a little grease on the new one when you replace it and it will go back in easily. If the dip stick itself is stuck you will most likely have to pull the tube out to get it removed. Hope this helps.
Posted on Aug 10, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 02, 2016 | 1972 Chevrolet Nova
on Nov 17, 2010 | Chevrolet Nova Cars & Trucks
Jun 30, 2015 | 1972 Chevrolet Nova
Aug 28, 2014 | 1972 Chevrolet Nova
Sep 26, 2013 | 1972 Chevrolet Nova
Jul 14, 2011 | Chevrolet Chevy Cars & Trucks
Nov 17, 2010 | Chevrolet Nova Cars & Trucks
Dec 29, 2008 | 2001 Chevrolet Silverado 1500
May 27, 2017 | Chevrolet Silverado 2500HD Cars & Trucks
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: