Question about 2001 Chrysler Town & Country

2 Answers

Transmission Problems We have two different codes the P0605 and the P0700

Posted by on

  • 1 more comment 
  • Luzcecilia51 Aug 10, 2008

    Where is the Transmission computer located?

  • Layne5 Nov 13, 2008

    On my 2000 Town and Country I have the engine light on and I only have the P0700 code, it is also leaking trans fluid. as long as I keep the trans full it drives fine no problem, but it is leaking quite a bit of fluid. my trans shop is currently moving to a new spot so they are down for a month and I don't trust anyone else with my vehicle. I work as much as I can on my own vehicles is this something the do it your selfer can do? I have also ran into the problem that my Haynes manual does not tell anything about the transmission except how to check the fluid! any advise from anyone wpould be greatly appriciated.

  • robctu1 May 12, 2009

    its only been 3 months since purchasing my 02 chrysler town & country , and the engine light came on so i took it this morning for a diagnostic test and the code P0700 came up I was terrified because if it has something to do with the transmission i know its gonna cost alot. i checked the transmission fluid the anti-freeze and engine oil, everything was fine, but i did notice, that the car has been driving kind of weird this morning it stalled out in a intersection around my neighborhood what do i do, how much is this going to cost I need help!!

    thanks

    Michelle

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Code P0700 means that there is a code in the trans controller. P0605 means there is an internal failure in the trans controller that can not be repaired. The only step in checking this code is replacing the trans controller. The controller is not the solenoid pack . Its the actual transmission computer.

Posted on Aug 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 02 when it gets hot it down shifts into low gear then I turn it off an start it an works fine like nothing happen then it drive well an then it goes again

Posted on Feb 08, 2013

2 Suggested Answers

  • 155 Answers

SOURCE: Error Codes P0700 and P0605

0605 is for an Internal Control Module Read Only Memory (ROM) Error. This is typical of a malfunctioning computer. If the computer is bad, your retrieved codes are probably wrong anyway. May need to replace computer, drive, then see if if your check engine light returns.

Posted on Jun 08, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I get code p0700 on 2004 dodge ram 1500 4.7 lt.


transmission system malfunction can be a few things the following links give some examples of different problems associated with p0700 code but more than likely if their is a noticeable problem than may have to have it diagnosed by a transmission shop
P0700 Transmission Control System Malfunction P0700 Dogge Ram Yahoo Video Search Results 2005 Dodge Ram 1500 transmission codes p0700 p0841 Transmission Automatic...

Aug 05, 2016 | 2004 Dodge Ram 1500

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

1 Answer

Codes p0700 p0605


obd2 is pretty simply to find what the codes mean.
http://www.obd-codes.com/p0700
http://www.obd-codes.com/p0605
the two may be related since one deals with rom.

Jan 17, 2015 | Volvo S70 Cars & Trucks

2 Answers

Can you tell me what a P0605 and P0700 on 2002 Chrysler Town and Country van


You have a computer problem. Try having the computer reflashed. You MAY have to replace the computer.

Oct 19, 2014 | 2002 Chrysler Town & Country

2 Answers

I have a Chrysler 2001 LHS engine light came on, transmission not shifting with trouble code p0605?


Most Chrysler cars today have a transmission control module which is probably part of the vehicles ecm? If you can tow the vehicle to your nearest Chrysler dealer they have the equipment and better knowledge to do any repairs necessary and will save you a lot of time and headaches of diagnosing the problem! I wish you all the best in getting your problem solved?

Oct 05, 2014 | Cars & Trucks

1 Answer

What does codes p0700 and p0605 means on a 2001 pt cruiser


Both diagnostic troubhle codes (DTC's) mean the same thing. There are really no testing procedures listed but look at your connectors and wires. Now for the bad news...P0605 & P0700 means there is internal problem with your transmission control module and in 99 percent of the cases it means replacement of the TCM. They do need to be programed afted installation. 2 procedures need to be performed. One is called a pinion factor and the other is called a relearn or quick relearn procedure and they do require the proper diagnostic computer equipment. The TCM is located behind the splash guard on the front left (drivers side wheel. Once you remove the tire and splash guard it is mount to the frame rail and has a 60 pin connector plugged into it. Wish it was better news but hope this helps clearify what the codes mean....

Jul 01, 2013 | Cars & Trucks

1 Answer

TROUBLE CODES 605 AND 700


Is this P0605 and P0700? If so read on.
P0605 - Control Module Fault
Possible causes- ECM/PCM Harness power supply circuit is open or shorted
- ECM/PCM Harness ground supply circuit is open or shorted
- ECM/PCM may be faulty
P0700 CHRYSLER - Transaxle Control System (TCM) Malfunction
Possible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module
Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem

Sep 12, 2012 | 2001 Chrysler Concorde

2 Answers

Can you tell me what the codes PO605 and PO700 are? PT Cruiser 2001


P0605-------- Internal control module read only memory (ROM) Error
Have the computor checked.
P0700-------- Transmission control system
Better take it to a transmission shop and have that checked so they can pinpoint the problem.

Aug 27, 2011 | 2001 Chrysler PT Cruiser

1 Answer

Check Engine Light on, codes P0605 and P0700


P0700 IS A CODE SAYING THAT THERE IS FAULT IN TRANS CONTROLLER..P0605 IS AN INTERNAL ERROR IN TRANS CONTROLLER..ACCORDING TO TEST,TRANS CONTROLLER MUST BE REPLACED

Feb 15, 2010 | 2002 Dodge Stratus

1 Answer

Error Codes P0700 and P0605


0605 is for an Internal Control Module Read Only Memory (ROM) Error. This is typical of a malfunctioning computer. If the computer is bad, your retrieved codes are probably wrong anyway. May need to replace computer, drive, then see if if your check engine light returns.

Jun 08, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

2,486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...