I can not find EGR valve on Chvey venture 2000. Please, Help me,where is it located? How can I replace it? I keep getting codes p0401,p0404 and p0405 Thank you Nick

Check out this case study on a Chevy Impala for that P1404 code on a new EGR. I only watch the beginning, (too long for me to sit and watch) but seems to be a communication issue.

https://www.youtube.com/watch?v=HT4OnP4U0to

https://www.google.com/search?q=P1404

https://www.google.com/search?q=P0404

..

Clean EGR valve or replaced.

egr valve bad,P0401 OBD-II Trouble Code Technical Description Insufficient EGR Flow What does that mean? EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. Symptoms You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. Causes A code P0401 most likely means one or more of the following has happened: The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced There is a blockage in the EGR (tube), most likely carbon buildup The EGR valve is faulty The EGR valve may not be opening due to a lack of vaccuum Possible Solutions In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open Clean out the EGR valve and/or tubing to remove deposits Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) Replace the DPFE sensor (with a good quality / OEM one) Replace the EGR valve Related EGR codes: P0400, P0402, P0403, P0404, P0405, P0406, P0407, P0408, P0409

Read more at: http://www.obd-codes.com/p0401
Copyright © OBD-Codes.com

Code 404 is for a problem with the EGR valve circuit.
The valve may be open or closed when it should not be.

P0401 is EGR problem
P0300 is a cylinder 3 misfire.
Replace EGR valve and do a full tune-up.

P0401 Code:
Exhaust Gas Recirculation (EGR) Flow Insufficient
https://curateview.com/p0401-code/

The code P0401 means P0401 Exhaust Gas Recirculation Flow Insufficient Detected.
__________
airbag reset tool also check fault code!

What code ? are a few different ones for EGR valve > Low & high circuit voltage , testing circuits , PCM testing etc.... no code tells you to replace the EGR valve without testing . Your best bet , take it to a qualified repair shop.
DTC P0401 Exhaust Gas Recirculation (EGR) Flow Insufficient
DTC P0403 Exhaust Gas Recirculation (EGR) Solenoid Control Circuit
DTC P0404 Exhaust Gas Recirculation (EGR) Open Position Performance
DTC P0405 Exhaust Gas Recirculation (EGR) Position Sensor Circuit Low Voltage

for p0401:
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open.
Clean out the EGR valve and/or tubing to remove deposits.
Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model).
Replace the DPFE sensor (with a good quality / OEM one).
Replace the EGR valve.