Question about 2000 Ford Windstar

1 Answer

2000 ford winstar

Keyless entry alarm and radio all quit working checked all fuses and they are good

Posted by on

  • 2 more comments 
  • twodumkats Sep 03, 2008

    Radio and acc (cassette player, cd player) doesn't work. power light doesn't even come on. Checked fuses all are good. What now?

  • Anonymous Jan 28, 2009

    2000 Ford Windstar went into a service shop to repair heater, when came out remote door entry button and CD/Radio (no power at all) do not work. The service shop denies (and asked to bring car back for further inspection but I had no time to do it yet).

  • MandyJu1981 Feb 02, 2009

    Did checking the fuses help?

  • Anonymous Mar 25, 2014

    Satellite radio quits working.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 232 Answers

CHECK THE MAIN FUSE IN THE FUSE BOX UNDER THE HOOD, USE TEST LIGHT TO TEST ALL FUSES

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a wire hanging down from my dash around the fuse area the car was running fine til this wire came out now it doesnt start what is it and how do i fix it?


The is no factory wire on a focus that will do that. It might be an aftermarket radio, alarm, keyless entry system that was poorly installed by previous owner and now shorted out. A fuse may be blown as well. If an aftermarket security system, it may be preventing the car from starting until everything is back in place (or completely removed). Good luck

Aug 07, 2011 | 2000 Ford Focus

2 Answers

My 2004 v6 ford explorer won't start new batery and new starter no luck wont even click ?


Did you check the start relay for voltage? Ohms reading?

If I remember correctly the circuit goes like this:
Key turns ignition switch which puts voltage to the start relay which engages the solenoid.
So if it isn't even clicking and your headlights seem to be working fine then it is either the ignition switch or the start solenoid coil.
On older Fords the start solenoid used to be remote mounted on a fender. I heard newer Ford vehicles had it integrated with the starter like GM does.
A quick visual inspection will tell you which and where you need to look.
You might check if there is a fuse for that as well.

Apr 01, 2010 | 2004 Ford Explorer

1 Answer

Ford 2000 excursion keyless entry not working


look online or go to the dealer and find a reprogramming procedure.

Mar 12, 2010 | 2000 Ford Excursion

2 Answers

CLock, radio, dome lights, speedometer, keyless entry dont work


Check fuse 8 (10 amp fuse) in the under dash fuse panel. Make sure you have voltage to it on both sides of the fuse.This fuse feeds all of the items you listed.

May 25, 2009 | 1995 Ford Mustang

1 Answer

Stereo and clock quit working,the electric door locks only work when the car is running or the key is on, the alarm that sounds when you leave the lights on(and key is off)does not work and the keyless...


speaker noise in car at all times even with key off,Radio does not work,Goes away when removing radio fuse or power door lock fuse.Does not quit when radio is unplugged including speaker wires.

Sep 20, 2008 | 2003 Mitsubishi Eclipse Spyder

1 Answer

2000 ford winstar


in fords there two fuse boxes one inside the vehicle and another underneath the hood, the three components r all on the same circuit which is protected by a maxi fuse a fuse that is 40amps or better,. there is a main fuse that protects the circuit itself outside of the fuse for each different accessory. check all the fuses in the vehicle with a fuse tester or a test light.especially the fuse box under the hood close to the battery

Aug 08, 2008 | 2000 Ford Windstar

1 Answer

Winstar wont start


THE THEFT ALARM WILL NOT ALARM THE VEHICLE TO CRANK OVER, ITS SOMETHING MECHANICAL JUST OCCURED AT THE TIME U INSTALLED THE RADIO, THE FACTORY SYSTEM IS BUILT INTO THE KEY FOR FORDS, TRY THE SPARE KEY,CHECK ALL FUSES UNDER THE HOOD AND UNDER THE DASH U MAY HAVE BROWN A FUSE AS WELL

Aug 05, 2008 | 2000 Ford Windstar

1 Answer

There is no sound from the horn when I press on the horn in the steering column or when I hit the panic button on the keyless entry remote. I have checked the fuse and it is good, also have checked the...


my keyless entry has been working great we went on vacation. it quit working i cheched the fuses and the battery in the remote everything is fine just does not work anymore

Jul 22, 2008 | 2005 Ford Escape

5 Answers

Mazda MPV 2000


Try "resetting" your keyless entry code. Which is a fancy way of explaining that I broke my keyless entry key fob and had to order a new one. It came w/ instructions explaining how to get the new fob to speak to the car's computer. It was weird (turn key on and off 3 times, open and close door three times, etc. **I'm sure my neighbors were watching and laughing**), but it worked. I'll scan and email you the insrtuctions if you wish. Dan: dcarterlaw@lycos.com

Jul 07, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...