My serpentine belt has broken where can I find a diagram, of the belt so that I can replace it correctly

Search Results

images for diagram on how to replace a serpentine
How To Install Replace Serpentine Belt Oldsmobile Alero 99 ...? 3:33https://www.youtube.com/watch?v=jkzXTt43uwwFeb 9, 2012 - Uploaded by 1A Auto PartsHow To Install Replace Serpentine Belt Oldsmobile Alero 99-04 2.4L .... There should be a belt routing diagram on the frame rail or under side ...serpentine belt install 3.1/ 3.4 v6 - YouTube? 4:00https://www.youtube.com/watch?v=GYoWuvEZ2DcMay 6, 2013 - Uploaded by JoeTheAutoGuythis a serpentine belt install video on a 3.1 liter gm v6 , 3.4 liters are the same in ... Replacing the alternator or serpentine on anyOldsmobile Alero 99-04 3.4 Liter ... Serpentine Belt Replacement 1995-2005 Chevrolet Cavalier .

Auto Repair Replace Serpentine Belt Dodge Ram 02 08 5 7L Hemi 1AAuto


How do you Change Replace or Install Broken 2002 2008 Dodge Ram 5 7L...

2004 Dodge Ram 1500 Serpentine belt diagram 5 7 hemi with ac Google...

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f802e8109 click on link to belt diagram.

The ventures serpentine belt can be removed and replaced by releasing pressure on the tensioner. Just take your large socket wrench and insert the square head into the square slot on the tensioner and use it to release tension on the belt.
-------------- For more detailed procedure with diagram and full procedure , click the link below :--- http://howtobyme.blogspot.com/2011/08/how-to-replace-serpentine-belt-on-2001.html --------------
This will help.thanks.Helpmech.

i needed a certain diagram also ang just googled serpentine belt diagrams and it took me to a site and iit was free but i didnt save the name try google

Here's a link to a series of videos that will explain how to change the serpentine belt.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here is a diagram of the belt routing which will help you put the belt back on correctly...

if no sticker under the hood to show the route. go to the auto parts store and ask for a belt diagram. if the don't help, try your local repair shop. best of luck.

Don't have a chart, video, or diagram available at the moment. Can offer you generic advice.

1.Somewhere in the middle of that serpentine belt, that is wrapped around all those pulleys, is an Idler tensioner Pulley. All this pulley does, is put tension on that serpentine belt. Usually located somewhere in the middle.

The Idler tensioner Pulley will be on a bracket. It will be on the end of the bracket. The bracket usually has a 1/2 inch square hole in it. This is used for a tool, that resembles a 1/2 inch breaker bar.
-> I, use a 1/2 inch breaker bar.
The 1/2 inch breaker bar is inserted into this square hole, and the bracket is pulled to one side.
This pulls the tensioner pulley away from the serpentine belt, allowing the belt to have slack, and then the belt is slipped off of one of those pulleys. Release the pressure slowly, remove the tool. Then the serpentine belt is removed all the way.

(The Idler tensioner pulley bracket, can only be moved in one direction, to take pressure off of the serpentine belt. The direction opposite, of it putting pressure on the serpentine belt.

The spring used to put pressure is Very strong. This is also an area, where you can easily slip, cutting your knuckles, or fingers, or hand, on sharp objects. Use caution, you may want to wear a glove, or gloves!)

Then the new serpentine belt is wound around the pulleys in the correct pattern, the Idler Tensioner Pulley is once again pulled to the side, and the last of the serpentine belt is slid into place. Then you slowly release the tensioner pulley, and it puts pressure on the serpentine belt once more.

Make sure the serpentine belt is in the grooves of the pulleys, and is wound around in the correct pattern.

On the car hood inside, or on the radiator support, or perhaps on the inner fender well, or in the Owners Manual, it should show the correct pattern for installing the serpentine belt.

The belt installation diagram is under the hood, look on the shock tower or over the radiator next to the Federal emissions certification sticker.

Click on the following free direct Link. It has the correct Serpentine Belt Diagrams for your 1996 Chey Tahoe 5.7L depending on your Engine Options (AC/No AC etc.).

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/chevrolet/model/tahoe/1996_chevrolet_tahoe_drive_belt_routing_diagram.htm