Bad solders in DRL relay located left side of steering column below change drawer behind dash. It will be indicated with a stamp DAYTIME RUNNING LIGHT RELAY. Remove it and redo the solders to the relay contacts in the unit. This will fix the DRL light in dash, return the DRL system to functioning and will also fix headlight not working problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
in canada? with DRL?
is the charge (battery Light on running)
nice photo but do name all lights, i see idle is at 800rpm good.
i see check engine light there, top left. so you need to scan PCM
using any scan tool
that is first.
DRL can shut down for other failures one is charge lamp. on.
if charge lamp is on , do not drive far, or it will stall and battery will discharge and be stranded. (till AAA auto tow is called <jumped)
It is up , behind, uncomfortably up and behind it. Get upside down, legs over the back of your chair, flashlight in your mouth, crazy up in and behind it. You won't find it at a glance. But once you see it, you will stay upside down to get it out. Good luck, and remember, stay cool. Its easy, just uncomfortable.
I have right now the same problem. I just pulled the fancy/shmancy radio head out of my (Honda) 1992 Acura Integra and the whole dash is now a mess. It had been professionally installed. The dome light now doesn't work, the "door open" warning lights stay on, the clock is messed up, etc. I installed the fancy head in another car, in a 1992 Honda Civic. That works perfectly. Sounds like you need to find a professional installer to re-do your new head. I think the dash lights and the taillights are on the same circuit/fuse.
Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights. Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.