Question about 1992 Toyota Pickup

1 Answer

Ignition switch replacement 1992 Toyota Pickup How to

Have a 1992 toyota pickup, manual transmission, 3.0 liter. It has a ignition switch in the dash. The key is lost so I cannot put it in the acc position. So want to take out the hole bracket and all which is attached to the steering column bracket goes around clamping with two srews? they look like threaded srews but there is no head to the screw. just a round type head, how do these two bolts come out. if i could remove these the hold ignition assy. would come out.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to remove the steering column and use a vice-grip to remove those bolts. i replaced them with allen bolts.

Posted on Sep 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1993 toyota pickup cranks with ignition switch but want shut engine off with the ignition key

You have a faulty ignition switch or relay not shutting of have it checked out by a auto elec

Feb 15, 2015 | 1993 Toyota Pickup

1 Answer

How to replace speedometer cable on 1992 Toyota pick up?

That particular model does not have a cable, it is an electronic speedometer with a speed sensor mounted in the transmission. Check all the wires coming from it, then the sensor and last check the actual gauge in the dash.Here's a link to check the speed sensor. Repair Guides Rear Wheel Anti lock Brake System Speed Sensor AutoZone... Here's the part and cost,awah... Vehicle Transmission Speed Sensor 1992 Toyota Pickup 2WD 4 Cylinders 2...

Sep 06, 2014 | 1992 Toyota Pickup

1 Answer

1987 toyota pickup lost all electrical except headlights

What works? Just headlights? Does anything electrical work that does not need the ignition switch to be in the on position? Possibly four way flashers, brake lights, horn, interior light, dash lights in instrument panel as well as headlights should all work without the key in the ignition and in the acc or on position. If this is what you have, then I would say you need to replace the ignition switch.
Hope this helps.

Jan 12, 2014 | 1987 Toyota Pickup

1 Answer

What year and model ignition switches fit 1987 toyota pickup

A seat from a 1987 Toyota will fit in a 1987 Toyota pickup--------------------------------------------------------------------------------------
maxidas ds708

Jan 12, 2013 | Cars & Trucks

2 Answers

1992 toyota pickup will not start no lights anywhere battery has 12.5 volts any thoughts?

check the wire going to the ignition switch or the 80 amp fuse is blown in the hood fuse box.

Jun 14, 2010 | 1992 Toyota Pickup

1 Answer

1989 Toyota Pickup- No Power Anywhere.

Check the ignitor and the ignition switch

Mar 15, 2010 | 1989 Toyota Pickup SR5

1 Answer

What type of transmission fluid for a 1992 toyota pick p

Auto dextron III ATF..  capasity A340H total fill 10.3 liters A340E total fill 7.2 liters. 
Manuel 75W-90  capasity 2WD G57 trans 2.2 liters 4WD G58 trans 3.0 liters. all other 3.0 liters 
Good luck and keep me posted. be glad to help.

Jul 01, 2009 | 1992 Toyota Pickup

1 Answer

1992 toyota pickup won't start. turns over, tries to start after spraying starting fluid into FI.

check for fuel delivery, remove fuel inlet line on fuel rail &placed in a container turn ignition on ,you should have fule flowing if not check fuel pump,ignition timing may also be of, check with timing lighty

Jun 22, 2009 | 1992 Toyota Pickup

2 Answers

Check engine lite blinks 4 times then 3 codes say starter singal...what does that mean..91 toyota truck

its the IG switch circuit or the IG switch Or ECU Which all means that check your Computer behind the right side kick panal for a good connection on everything and check the IG switch which is the ignition switch its located under the dash connected to your ignition

Apr 25, 2009 | 1991 Toyota Pickup

Not finding what you are looking for?
1992 Toyota Pickup Logo

762 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides