No....it doesn't have any controls for passsenger or driver. there are five vents and 3 of them blow cold air. It probably is the blend door. thats what one of my three opinions said. So is there any way to tell for sure? Labor prices ****!!! Or is there any way I could fix it myself? Thanks!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ether the blend door actuator is bad or the climate control module is failing. most likely the blend door actuator. would have to pull most of the under dash out to get to it to replace it. not fun at all.
I have a 2000 pontiac grand prix with a digital climate control system.
The heat quit working, it doesn't blow out any heat. Now that it is warm
outside the air stopped blowing out any air. The digital temperature on
the climate control is not correct. When it states that it is below 30
degrees on the ext and it is warm outside the air wont be cold. Once it
starts going above 30 degrees the air gets colder. Today the blower stop
working all together. Was told it maybe the climate control unit was
bad. You can hear the door opening/shutting when you switch the temp
from cold to hot. But there was no heat blowing out whatsoever in the
winter time. Could you please give me your opinion on whether or not it
is the climate control unit or something else?
If the heater coil was bad, it would be leaking radiator fluid... probably into your dash/floorboard (depending on where it is installed in your model car). There is a switch that diverts the hot radiator fluid through the heater coil when you want heat. There is also an air diverter valve that helps to mix the hot and cold air. The fluid valve is controlled by the A/C settings control. The one that you use to choose between heater/air conditioner/vent/ defrost. The air diverter is controlled by the temp mixing controller. The most simple explanation is that one of those valves or the controller of one of those valves is not working. If the hot water cant be diverted through the heater coil, the coil can't exchange the heat (warming the air). If the air diverter (hot/cold controller) cant move to add heat, then all you will feel is air from the vent side (from outside) or from the A/C cooling the air.
I would guess that its either a controller or one of the valves themselves. Odds are, it is a controller. That tends to be what malfunctions first.
With regards to you a/c not blowing cold there are several faults that could cause this. Your compressor may not be working, they may be a restriction in your A/C lines, your compressor and/or evaporator may be clogged, you may have a leak, or i could be something as simple as fuse.
Check the ac filter, it might be dirty and thats why it is not blowing out enought cold air. The filter is located under the wiper cover but behind the firewall on the passengers side. You access this by lifting the hood and removing the rubber type gasket that holds both together, right on top of the blower unit.