Question about 1995 Chevrolet Caprice

3 Answers

Where is the speed sensor located for my 96 caprice?

I need to replace it but cannot located, where should i look?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 321 Answers

Your car has the 4L60E trans,and the speed sensor is located in the tailshaft of the trans.The tailshaft is located on the rear of the trans,and is held onto the trans with 4,15mm bolts.The driveshaft slips into the tailshaft.The speed sensor will have at least 2 wires going to it.The speed sensor will be located either on the driverside or passenger side of the trans.95 was a transitional year,so the speed sensor could have been mounted on either side.Good luck

Posted on Aug 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Where is the speed sensor located for my03vw jetter 1.8 t

Posted on Nov 07, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,039 Answers

In the tale of the trasmission hope it a fix for you and fixya rating for me thanks pierre

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 mazda mpv 3.0 repair manuel. I need to replace a freeze plug and would like to locate them.Can I see a chilton repair manual?


If you go to this web site it will have pictures of the location and how to replace it
www.autocross.com/Replacing_a_freeze_plug/ccr200704011/1

Dec 16, 2014 | 1996 Mazda MPV

1 Answer

Where are the sensor located on a xterra truck it is a 2004


The cooling sensor is located on the intake , when you go to autozone for the replacement part ask for a diagran of its location.

Nov 23, 2013 | Nissan Cars & Trucks

1 Answer

Need to replace a purge vent valve on 2006 cts cadillac where is it located and what does it look like


If you buy one from the dealership you will know what it looks like !
Replacing it , , , it can be located in a few locations but it is usually on the bulkhead under the hood.

Aug 26, 2012 | 2006 Cadillac CTS 3.6

1 Answer

The temperture meter on the instrument panel is not working, on reading. I need to find out which temperture sensor and where it is located. The car is a 1992 Toyota, Previa.


The temperature gauge sensor is what you need to replace. It is also a good idea to replace the thermostat, but is not necessary.
The sensor is usually located on the top of the engine on the driver side. It will (should) have a single wire coming out of the top of it.
Locate (purchase) a repair manual or ask a parts dealer representative to help locate it's exact location.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

Jun 14, 2010 | 1992 Toyota Previa

1 Answer

I need to replace my CO2 sensor, but I don't know ...


If you are talking about O2 sensor ?? The sensor is locater either in the exhaust manifold or the exhaust pipe. It's not hard to replace in either location. Hope this will help you.

May 20, 2010 | Cars & Trucks

1 Answer

I need to replace the turnsignal switch, where is it located. I have no turn signals right or left. The park lites, hazard lites and brake lites work. The turn signal switch needs replacing, where is it...


the switch located inside the steering collum also as
I don't know what year your car is but if it is 1990 or
above it is air bag equiped this means the bag has to
be removed to pull the wheel,
If you have no experiance with air bags please consult somone who has it can be dangerous.
if you have any more ? gimme a buzz good luck

Jan 12, 2010 | Cadillac DeVille Cars & Trucks

1 Answer

Need how to and location to replace knock sensor


Im looking for the same part location on a 2002 chevy blazer. It might be under the distributer cap.

May 30, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...