Question about 1996 Plymouth Neon

2 Answers

Parking/neutral switch trying to find were the parking/neutral switch is located at

Posted by on

  • Anonymous Mar 30, 2014

    i have a p0850 dtc can you tel me where the park neutral switch is located with a 2.4l engine

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Hi there jwbrown1981,

It's located on the side of your transmission/transaxle, just above the pan.

You need to jack up your vehicle to get to it. Be safe, use jack stands.

Remember: Good things come to those who Rate!!

Mike


Posted on Aug 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi....
The PARKING NEUTRO SWITCH. ( neutro safetly switch).
If you car is an Auto, trans. is a little switch located on just
alittle upper of the trans. on the radiator side. use a Connector of 3 wires. And the switch is Thread installed.

But if your trans is MANUAL.
The switch is on the Clutch Pedal Base.

Ok.. I hope this help on your question.

Thank you for use fixya.

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chrysler Sebring. How do I check to see if the neutral safety switch is bad.


The switch is called a PRNDL switch and is located on top of the valve body, inside the transmission.

May 18, 2014 | 2004 Chrysler Sebring

1 Answer

How do i check to see if the neutral safety switch is bad. 2004 Chrysler sebring GTC


Most safety switches are a black module located on the side of the transmission, where it shifts into gear.

May 19, 2014 | 2003 Chrysler Sebring

1 Answer

Intermittent failure to start,2004 Toyota sienna,move out of park to neutral,back to park,starts right up,neutral saftey switch????


Yes this would be a transmission neutral safety switch problem. the switch sit over the post that the shift cable attaches to on the ****** case. Picture below.
10_22_2012_10_02_02_pm.jpg

Oct 22, 2012 | Cars & Trucks

2 Answers

My 1998 eclipse gs will inly start in neutral and I was told cable mechananism possibly, where is that located


If it starts in neutral, the cable is most likely NOT the problem. The MOST LIKELY cause of your problem would be the transmission range sensor (A.K.A. neutral safety switch, or Park/Neutral switch) It is located on the right (passenger) side of the engine compartment on the transaxle under the lever for the shift cable. It looks like the picture below. You can try adjusting it first, but most likely it will need to be replaced if it works in neutral and not park.


dttech_130.gif

Jul 04, 2011 | 1998 Mitsubishi Eclipse

1 Answer

P 0705 transmission range sensor circuit malfunction code for a 2001 mitsubishi galant can i replace it and where is it located


P0705 - Transmission Range Sensor Malfunction. The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM). The possible causes of this are the following: Open or short park/neutral position switch circuit. Poor park/neutral position switch circuit connection. Misadjusted park/neutral position switch. Park/neutral position switch may be faulty. Inspect the pnp switch and replace if needed.

Jan 15, 2011 | Mitsubishi Galant Cars & Trucks

2 Answers

Where is the neutral safety switch on a 96 camero


The park/neutral position switch prevents the car from being started when the transmission is in any gear other than Park or Neutral.. When the transmission is in Reverse (with the engine running), the switch completes the back-up light circuit, illuminating the back-up lights.

1fc6fd3.jpg

Fig. 1: After removing the console, you can access the park/neutral position switch.

Hope help with this (remember rated this post).

May 21, 2010 | 1996 Chevrolet Camaro

1 Answer

Trying to locate the nuetral safety switch in 1990 GMC 1/2 ton


The back-up light switch is incorporated into the neutral/park safety switch. The neutral safety switch on 1988-94 models is mounted in the steering column.

Neutral Start/Back-Up Switch
The procedure is for switches that are mounted on the transmission only.
This adjustment is performed with the switch removed from the vehicle. Neutral position tool J 41364-A or its equivalent is required for this procedure.
  1. Position tool J 41364-A or its equivalent onto the park/neutral switch. make sure that the slots on the switch are lined up with the lower tabs on the tool.
  2. Rotate the tool until the upper locator pin on the tool is lined with the slot on the top of the switch.
Do not remove the tool from the switch.
  1. Install the switch and remove the tool.

Hope this helped (remember rated this post).

Apr 09, 2010 | 1990 GMC C1500

1 Answer

1996 Jeep Cherokee intermittently only starts in Neutral


Neutral Saftey Switch located on top of your transmission. Costly to replace but often can be taken off and cleaned.

Jan 13, 2010 | 1996 Jeep Cherokee

1 Answer

Where is the starter relay located on 96 camero


I do not have a diagram of its location, but the manual says it is in the lower right-hand side of the instrument panel.
Also note that the "Park/Neutral" switch (in the transmission) is in line with that relay. I would recommend checking that out too. You can do this by shifting to Neutral and trying to start, or using a multimeter to check that the switch is working when in Park and Neutral.

Nov 22, 2009 | 1996 Chevrolet Camaro

1 Answer

My car won't shift out of park, 1993 ford crown victoria i need to know the location of the sclu switch and/or the park sense switch


Check to make sure your brake lights are functioning properly. The crowns vics of that year have a neutral safety switch that links the shifter to the brake lights.

If the brake lights don't turn on = it won't come out of gear

If they do turn on = it could be that the neutral safety switch is out of place or malfunctioning.

I do believe that the neutral safety switch in that model should be located near the firewall attached to the upper side of your steering column.

You can easily get a manual for your car or look it up at the library to find it's exact location. Or try asking at your local auto parts store.

Nov 11, 2009 | 1993 Ford Crown Victoria

Not finding what you are looking for?
1996 Plymouth Neon Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

63584 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...