Question about 2003 Dodge Stratus

1 Answer

Tail brake light out - 2003 Dodge Stratus

Posted by on

1 Answer

I had this problem about a month ago. My mechanic put a piece of "electrical contact paper" (or something of the sort) because there was some error with the connection between the circuit and the bulb. He said if that didn't work (which, luckily, it did), then I would have had to have the circuit board unit (not exactly sure what he called it) replaced, which may have been expensive. As for the contact paper and labor, my bill came to roughly $45. Not sure how much a circuit board replacement would have been, though.

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is tail light relay on 1998 nissan maxima?


Is it the brake light or the running lights, are all the lights on went the ignition is in the off position and the light switch is in the off positions aswell or the brake lights are on including the third brake light?

Jun 29, 2014 | 1998 Nissan Maxima

1 Answer

Brake lights and tail lights don't work


cheek you brake light switch it's under the dash.. if it goes out it kills brake and tail

Feb 07, 2013 | 1995 GMC Sierra C1500

1 Answer

Headlight switch on makes tail light dim


there must be a short circuit which powers tail lights and brake lights. probably you have a dual filament bulbs which have both brake and tail light together. check for bulb, socket/or bulb housing and harness of that light.

Nov 19, 2011 | Cars & Trucks

1 Answer

The brake lights do not want to work. i have changed the brake switch under the dash and the bulbs on the tail lights.still nothing. i also, changed fuses.


does the high mounted brake light work? the brake switch has 2 contacts one for the high mount (LT BLUE/BLACK) and one for the tail brake lights. The tail/brake light wire is LIGHT BLUE. the main connector between the brake light switch and the tail lights is C208 which is located behind the rear seat, left side. So if there is power coming out of the brake switch OK and no power at the tail lights, check that connector. Hope this helps.

Sep 23, 2011 | 1989 Pontiac Firebird

1 Answer

Tail light works, brake light works but when tail lights on brake light doesn't work cant find a schematic to see what is common to tail and brake light


The rear tail light switch in the circuit. Remove the switch from its connect and bypass the the terminals on the connector with jumper wires and see what happens. If when you by pass the switch the tail and brake lights work you found the culprit.

Apr 26, 2010 | Hyundai Motor 1999 Elantra

3 Answers

Brake lights will not come on. It is not the bulb. The tail lights work.


The tail lights working would not necessarily mean that the brake light bulbs are good. If they are the type that have a double filament (ie: one filament for the tail light and another filament for the brake light ) the brake light filament could be bad and the tail lights still would work. If they are either single filament type bulbs or double filament type, I would check the bulb, fuses, and contact switch on the brake pedal.

May 10, 2009 | 2003 Chevrolet Suburban 1500

3 Answers

Tail lights and brake lights not working - not fuse - what can it be?


Brake light switch, located on upper brake pedal should be checked, that is most likely your brake light issue, but U say tail lights aren't working, but running lights do, tail lights and running lights I would consider to be the same, so can u clarify that for me? Let me know how the u do w/ brake light switch, and if u have issue w/ tail lights?

Nov 01, 2008 | 1994 Ford Thunderbird

Not finding what you are looking for?
2003 Dodge Stratus Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...