Question about 2005 Chevrolet Equinox

1 Answer

Anti-lock brake system light comes on as well as the traction control light.

Posted by on

  • GJohnson835 Sep 09, 2008

    The vehicle will not start, plus the traction control and ABS lights come on when you attempt to start the vehicle.

  • bdmac184 Jan 31, 2009

    Same problem. ABS light and Traction Control light both come on after driving for a couple miles. As soon as the car is stopped for any length of time it goes off and doesn't start again until a couple miles down the road. Car starts/stop all right.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ive been having the same problem. They told me it was just the front hub sensor.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ABS & Traction control light are on, what is causing this?


About 39,700,000 results (0.44 seconds) Search Results

    Traction Control Light is on Inspection - YourMechanic

    www.yourmechanic.com > Auto Repair and Maintenance Services
    As a result, sometimes an issue in the ABS can trigger the traction control light. If this is the case, then both the ABS and Traction Control lights will be on.

    My anti-lock brakes and service traction control lights came on ...

    https://answers.yahoo.com/question/index?qid...
    Oct 16, 2006 - I drive a 2000 chevy impala...i have 135,000 miles on my car. ... The problem is that starting in '92, Anti-Lock Brakes are controled electronically, so if there is a problem with the sensor, your ABS might fail when you need them the most. ...ABS (?nti-lock Brake System) is a ...

    How To Fix ABS & Traction OFF / Service Traction System ...

    ? 5:35
    https://www.youtube.com/watch?v=KFQphWamcjQ
    Feb 17, 2014 - Uploaded by Zero Gar
    How To Fix ABS & Traction OFF / Service Traction SystemLight Monte ... side connector that leads from the ABS controlmodule to the speed ...

Feb 05, 2016 | Cars & Trucks

1 Answer

What does it mean when my anti-lock brake light comes on and the low traction light comes on and shuts off?


You need to have the ABS system scanned. You probably have a bad wheel speed sensor. most likely located in one of the hub bearings meaning; you may have to replace a hub wheel bearing assy with the faulty sensor. Traction control uses the same speed sensors as ABS. when the warning lights are on the system is not working.

Jan 21, 2016 | 1995 Chevrolet Lumina

1 Answer

Anti lock brake light and traction control light come on when starting car.


Typical issues to cause this fault would be:
1) Steering geometry is out and requires realignment.2) ABS sensor in hub is faulty.

Nov 15, 2012 | Cars & Trucks

1 Answer

2000 buick regal , track light on, anti lock brake light on???


You will need to take it to the GM dealer or any well equipped brake shop and have the system ABS/Traction Control system computer scanned, a fault has occurred in the system and at this time you have no Traction control or Anti-Lock brakes. When the lights were turned on the systems control module stored a code for the fault in the system. The ABS and Traction Control are one in the same system.

May 20, 2011 | Buick Regal Cars & Trucks

1 Answer

My traction control light and my abs lights keep coming on what does that mean and how do i fix it?


The abs is your anti-lock braking system. It may work with your traction control light, I'm not sure. But you apparently have a problem with your anti-lock brakes. It could be the hydraulics or it could be the brakes themselves. I would have it checked out.

Jul 14, 2010 | Cars & Trucks

3 Answers

Traction control and anti-locks(ABS) lights come on.


Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

Jul 06, 2010 | 1998 Cadillac DeVille

1 Answer

ABS light came on and also the Advanctrac light....says check ADVtrac.


There are many sensors on your anti-lock brake system, as well as on your traction control system. Sometimes one giving a signal will set off the other one. Unless you are can physically feel any symptoms, then a computer test is really the only way to tell what the problem is. Many auto part stores offer to check the computer, and many of those will do it for free. One you know what the computer says is wrong, you can have the problem repaired. You can still drive your vehicle, but be aware that it is highly possible that your anti-lock function as well as the traction control system may not work. The anti-lock keeps your wheels from locking up if you slam on the brakes. The traction control diverts power and/or uses the anti-lock brake system to reduce braking on a certain wheel. I would imagine that there is a problem with the anti lock brake system since it is used in the traction control system. Hope it turns out to be small!

Jan 24, 2010 | 2003 Ford Expedition

2 Answers

Anti-Lock brake light and traction off light came on


U have most likely damaged a wheel sensor ring, in order to ID the one you damaged u will need to have the ABS/TRACTION CONTROL system tested for trouble codes, this will lead to the right area for repair.

May 28, 2009 | 2002 Pontiac Bonneville

1 Answer

Problem with my cruise control and ABS light on 03 Explorer


Anti-Lock Control —Vehicles Built After 03/2002 The 3-channel anti-lock brake system consists of the following components:
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • Anti-lock brake control module (ECU)
  • rear wheel speed sensor
  • rear wheel speed sensor rings
  • yellow anti-lock brake warning indicator
The 4-channel anti-lock brake system with traction control and stability assist system consists of the following components:
  • active brake booster with integral solenoid
  • brake booster release switch
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • stability assist module (ECU)
  • stability assist event indicator
  • lateral accelerometer
  • longitudinal accelerometer (4x4)
  • rear wheel speed sensors
  • rear wheel speed sensor rings
  • steering wheel position sensor
  • yaw rate sensor
  • yellow anti-lock brake warning indicator
  • brake pressure transducer
  • traction control switch
---------------------------------------------------------------------
I suspect the abs issue is causing the speed control not to work if it happened at the same time the cruise control stopped working. When the yellow ABS light comes on, it means the ABS is dactivated. You may have a faulty accelerometer which senses acceleration and yaw (side to side lean). I have not seen a bad one but you said it is sensitive to acceleration.
I would unplug it and see what happens. The connector should have a small tab to depress so you can pull the connector out.
Here is where it is:

Accelerometer Removal and Installation
  1. NOTE: The accelerometer is located under the center, rear passenger seat carpet. (I think you have to remove seat for access).
    Cut the carpeting along the perforations.
  1. Disconnect the electrical connector.
  1. Remove the nuts and remove the accelerometer.
cd31596.gif
Have dealer hook up tester and pull fault codes if you can't find an easy solution.
Some background info
  • A malfunction in the anti-lock brake system will cause the anti-lock brake control module to shut off or inhibit the system. However, normal power-assisted braking remains.
  • Malfunctions are indicated by the yellow ABS warning indicator in the instrument cluster.
  • The anti-lock brake system is self-monitoring. When the ignition switch is turned to the RUN position, the anti-lock brake control module will carry out a preliminary self-check on the anti-lock electrical system indicated by a three-second illumination of the yellow ABS warning indicator in the instrument cluster.
  • During vehicle operation, including normal and anti-lock braking, the anti-lock brake control module monitors all electrical anti-lock functions and some hydraulic operations.
  • Each time the vehicle is driven, as soon as vehicle speed reaches approximately 20 km/h (12mph), the anti-lock brake control module turns on the pump motor for approximately one-half second. At this time, a mechanical noise may be heard. This is a normal function of the self-check by the anti-lock brake control module.
  • Pedal pulsation coupled with noise while braking on loose gravel, bumps, wet or snowy roads is normal and indicates correct functioning of the anti-lock brake system.
  • Warning Lamp Indicator
    The anti-lock brake system (ABS) uses the yellow ABS warning indicator to alert the driver of a malfunctions in the ABS.
    The yellow ABS warning indicator will come on to warn the driver that the ABS has been turned off due to a symptom that exists in the ABS. Normal power assist braking remains but wheels can lock during a panic stop while the yellow ABS warning indicator is illuminated.

    -----------------------------------------
    Please report back, I am curious if that is what it is. Good luck

    Mar 03, 2009 | 2003 Ford Explorer

    1 Answer

    TRACTION CONTROL.


    that is what it is desgined to do - reduce acceleration and apply the brakes intermittently when the wheels spin. You have a switch you cn push to disable it. You need to disable each time you start car. See owner manual.

    06-10: Traction Control 1996 Contour, Mystique Workshop Manual
    DESCRIPTION AND OPERATION Traction Control System The optional traction control system is designed to control wheel spin when accelerating on slippery or loose surfaces. Traction control system is available only with anti-lock brakes. The traction control system includes the following components:
    • Hydraulic control unit.
    • Throttle control actuator (9N825).
    • Traction control switch.
    • Traction control warning indicator.
    • Front brake anti-lock sensor (2C204).
    • Rear brake anti-lock sensor (2C190).
    The traction control system operates as follows:
    • System functions by transferring torque from the spinning wheel to the wheel with the most traction.
    • This is achieved by applying the brake at the spinning wheel through the hydraulic control unit or reducing the throttle opening.
    • Traction control braking and throttle control occur at vehicle speeds up to 50 km/h (30 mph).
    • At vehicle speeds above 50 km/h (30 mph), only throttle limiting control is used.
    • If speed control is operating when traction control system engages the traction control system will disengage speed control through the use of a speed control relay. This action is the same as applying the brake pedal with speed control engaged.
    1996 contour
    Traction Control Switch The traction control switch is located on the instrument panel, left of the steering column.

    Oct 22, 2008 | 1995 Ford Contour

    Not finding what you are looking for?
    2005 Chevrolet Equinox Logo

    403 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6878 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...