Question about Ford F-150

Open Question

Do they make short throw shifters - F-150 Ford Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 ranger manual tran will change gears but wont go in to 5 gear hard to shift


The ball on the Shifter that mounts on the TOP of the transmission is worn and needs to be replaced in order to get the Complete throw (Movement) of the shifter. It is an easy repair, 8 screws to take the cover off, 4 bolts on the cover and then pull up the shifter and replace the ball

May 26, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

Yes i just bought a short throw shifter for my 2003 alero but i cant find out how to swap out because there is a plastic O ring around the factory shifter that i just cant remove.


I have a 2000 Alero Gx coupe.. Same setup. I had to use some sort of plyers, Grip the stock rubber shift knob, and twist to the left as hard as I could to get it unstuck, then set plyers aside, and unscrewed with my two fingers. Once off, that safety feature and spring slids right off. you can use it with a custom knob, unless you are cutting it down to make a short shifter (Or a short-shifter kit, either way works)
Hope this helps :)

Nov 27, 2010 | 2003 Oldsmobile Alero

1 Answer

The threads brock off the shifter lever that hold the shifter knob on. what is the true name of this part and what is the part number. it is a 1995 Jeep Cherokee Sport 4.0L strait 6. 5 speed manual...


you need a shifter its one piece what you are looking at goes into the top of the transmission with 4 bolts you are better off getting a short throw from b&m or hurst for about 200.00 try 4wd hardware.com or quadratec.com or ebay you will spent that much from dealer and the short throw is way better !

Aug 14, 2010 | 1995 Jeep Cherokee

1 Answer

How to install a B&M short throw shifter on a 91 jeep wrangler YJ. Is it necessary to lower the transmission to install new shifter? Have already removed shift lever


No, There is no modifications of that sort to install a shifter if you have the application correct.. Oops, you mean remove? Still no. The floor should have a removable pan on the hump above the trans.

Nov 09, 2009 | 1991 Jeep Wrangler

2 Answers

I have a 97 miata w/ 5 speed. When I push in the


Yes you most likely have a bad throw out bearing. If you replace the bearing you would do yourself a favor and replace the clutch and pressure plate while you are there.

Oct 07, 2009 | 1997 Mazda MX-5 Miata

3 Answers

My 98 cavalier manual stick shift will not go to reverse gear


sounds like the shifter linkage has worn and not working properly need to lift in air and inspect the linkage

Jul 08, 2009 | 1996 Chevrolet Cavalier

1 Answer

1987 Porsche 944 shifter issue


All the 944s have a loose shifter you can replace you shifter with a short throw shift kit . You can find them on ebay for about 70 bucks

Mar 05, 2009 | 1983 Porsche 944

2 Answers

Manual Transmisson Shifter


there is a bushing that keeps the shifter tight it shhould be under the car right under the shifter linkage before the linkage connects

Dec 07, 2008 | 1999 Kia Sephia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...