Question about 2007 Acura TSX

1 Answer

A/c won't work and there is freezon and the fuse is not broken..... also the headlights dont work.... high beams work but not low beams..... and the fuses are all good? 06 acura tsx

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

Try the relay for the a/c problem.  Try the relays for the headlights also.  

Posted on Aug 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Where are the headlight relays 1998 chrysler sebring?


Check in that fuse box again. There is one for each, the high beam and the low beam.

Jan 16, 2013 | Cars & Trucks

1 Answer

1996 dodge Ram 1500 4x4 headlights dont work.All other lights work. Headlight lamps are all good. Could it be the switch or the multifunction switch? High beam works when I pull on the directional le


The headlight switch gets power for the headlights from a 50amp fuse.
The fuse powers the headlight switch then the dimmer switch breaks for high and low beams. So if the high beams work, the problem may be with the dimmer switch.
The dimmer switch is made into the turn signal switch on the column. You would need to check the low and high beam circuits at the switch for power.

Jan 14, 2013 | Dodge Pickup Cars & Trucks

1 Answer

Headlight won't come on in low beam


Someone would need to check for voltage output on the dimmer switch for low and high beam.

Jan 13, 2013 | 2004 Ford Taurus

2 Answers

Where is the headlight relay in the 1998 jimmy? Low beams won't come onat night everything else does. high beams work


There is a headlight relay in the engine compartment fuse box, but its after the headlight switch and before the dimmer switch, so it powers both high and low beam circuits.
I would check the dimmer switch.

Dec 12, 2012 | 1998 GMC Jimmy

1 Answer

My low beam head lights will not work, but high beam will. What could the problem be.


The headlight bulb has two elements. One works with high beam and the other works with the low beam. The low beam element is broken/fused. You have to change the headlight bulb in this case which is available at any of the auto spares shop.

Aug 02, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

My headlights don't work, but the brights do. What caused this and how can I fix it?


Every headlamp has a bulb inside that has two filaments one for high beam and the other one for low beam, if any of those filament is cut then that beam (High or low) won't work. If your high beam work then your fuse it's ok, so you can visually inspect your headlights bulbs for broken filaments. remove bulb socket and remove the bulb carefully to inspect the filaments. if the filaments are atacched from one terminal to the other then the bulb it's ok, if not replace the bulb.

Jun 28, 2011 | 2002 Chevrolet Suburban

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

2 Answers

What would cause both low beam headlights to go out at the same time? i have replaced the headlights and they still dont work.


The headlight high/low beam switch assembly.96 Safari has the turn signal stem as the high/low beam switch.Removal of the steering wheel is necessary to get to the switch assembly for replacement.

Jul 13, 2008 | 1996 GMC Safari

Not finding what you are looking for?
2007 Acura TSX Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...