Question about 1988 Daihatsu Charade

1 Answer

How to remove front brake pads from a 2004 Diahatsu Charade

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

What i do is remove fluid from master cyl. in engne bay. jack up front, remove wheels. with decent flat blade push piston back through caliper between inner pad and rotor. remove lower caiper bolt (12mm). pivot caliper up remove old pads, fit new pads. Check inner and outter pads and dont forget the shims!!! refit lower bolt. pump brake pedel. top up fluid in master cyl. refit wheels. go for drive to bed in. accel. to 60kmh brake to 20kmh repeat 5 times.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Daihatsu charade


If there is a wrecker in the town then check there . It is unlikely that you will get matching colours so be prepare d for a paint job on the panels . IF not check nearby wreckers or import the panels from a wreckers in japan.

Mar 23, 2014 | 2005 Daihatsu Charade 1.0

1 Answer

When I bleed the brakes on my diahatsu charade air bubbles come out of the fluid resevoir, Why is that?


bleeding is done only to remove the air in the brake cylinders it is always there when you work with your braking system

Jun 29, 2010 | 1988 Daihatsu Charade

1 Answer

Are there any precautions i need to take when unhooking fuel lines while removing intake manifold from 1990 diahatsu charade 1.3?


just make sure that the engine is not hot and that you use the proper tools for disconnecting the lines.

Dec 29, 2009 | 1990 Daihatsu Charade

2 Answers

Rear brake lights always on


sounds like brake pad sensor damaged or did you forget to put in new pads or removed? if its got one.
low fluid in brake reservoir can cause light to stay on also
or hand brake light switch shorted to earth have seen coins jammed in there b4

May 28, 2009 | 1992 Daihatsu Charade

1 Answer

Can't seem to locat downstream oxygen sensor


i own a diahatsu charade se 1.3 liter engine,it is a standard or a shifter.... there is only one oxygen or o2 sensor on the front, there is no other one to worry about....if this is your model your good to go, hope this helps...will try to get diagrams posted, if i can locate the books again.....hope this helps you....shia

Mar 17, 2009 | 1991 Daihatsu Charade

1 Answer

Specs for 1992 3cyl diahatsu charade ignition timing


Timing set with vacuum hoses disconnected and blocked is 5° advanced when flywheel dimple lines up with notch plate.

centrif wieghts 10.5° @ 2800
vacuum two stage 11° @ -320mmHg.

Feb 19, 2009 | 1992 Daihatsu Charade

2 Answers

Engine Number Location - 1990 Diahatsu Charade


You might be looking for a long time, because Daihatsu tended to only stamp the head with a serial number. If it's the 3 pot CB23 you will find the number on the front left corner flat of the head adjacent the rocker cover .

Sep 16, 2008 | 1990 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...