Question about 2003 Mitsubishi Galant

2 Answers

Galant rear wheel hub

Hi

Please let me know if you know how i can change my 2003 mitsubishi galant rear wheel hub.

my email is mos.eskandari@gmail.com
thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Remove your rear wheel then remove the brake assembly. there are 4 bolts that hold the hub to the rear axel with anti lock brakes you will have a wire to remove from the hub. it may tak a large hammer and chisel to remove the hub. but it will come off. then reinstall (if there is any shims behind the hub they must be put back in in the same directions (these are alignment shims) some have some dont. tighten bolts and test drive the ca 5 miles or so. then retighten the lug bolts. and then again after 100 miles.
hope this helps galant rear wheel hub - 99116a8.jpg

Posted on Aug 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,128 Answers

There is actually a puller madeto dod so.. but if none available rap the drumon the flat part to release the drum from the ring it sits on.. takes some effort some times. tap on the drum all around it and it will slowly come off.. to see how to replace them go to this site and he shows you how its done it is a eclipse he is workinng on but there identical to the galants i just did rear brakes on one today,
http://www.youtube.com/watch?v=4JmHNB2II6w

Posted on Dec 15, 2012

  • Daniel Sanford
    Daniel Sanford Jan 31, 2014

    fwd 4 spd transmission stil gud ? also moter mount rubber gone causing moter to move 2 2 1/2 " also driveaxle has play in and out 1/4" sorry for the trouble you are really helpful so far

  • Daniel Sanford
    Daniel Sanford Jan 31, 2014

    sorry wrong page

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the labor cost to change the pcm on a 2000 6 cylinder Mitsubishi galant


Mitsubishi Repair: Problems, Cost and Maintenance

repairpal.com/mitsubishi
A guide to problems, costs, maintenance and repair for your Mitsubishi. Problems ... 2003 Mitsubishi Galant. 2 answers ... my 2006 ME does not change speed, somebody could please help? ... I was told by Pepboys 6. 2000 Mitsubishi Galant.Missing: pcm

Mitsubishi Galant Repair: Problems, Cost and Maintenance

repairpal.com > Cars > Mitsubishi
Learn about common Mitsubishi Galant problems, recalls and typical maintenance and ... A guide to problems, costs, maintenance and repair for your Mitsubishi Galant ...2000 Mitsubishi Galant ... Dealers will inspect the cooler pipe and replace it if anti-corrosion properties are found to be insufficient. ... It's a 6 cylinder.

Oct 29, 2015 | Mitsubishi Cars & Trucks

2 Answers

Why my rear wheel is not straight like the front wheel.........


this is probably from a failed suspension bush and or spring/ shocky . Have it inspected by an accredited suspension specialist . When done ensure that the rear wheels are properly aligned as their alignment affects the front wheel alignment.

Jun 23, 2014 | 1999 Mitsubishi Galant

2 Answers

Rear Brakes 2002 Mitsubishi Galant


look through the wheel,if you see a 2"deep rusty can then its drum but if you see a shiny round plate,then its disc(you call em rotors)...

May 21, 2010 | 2002 Mitsubishi Galant

1 Answer

Hi, how much oil should I put for 2003 mitsubishi galant 2.4l when change engine oil?


Hello tiffanytong1: My name is Roger and I can help you. The correct amount of oil when also replacing the oil filter is four and a half quarts. Should you need further help please just ask. Please rate the answer as this way I know it was helpful. Thank You for using Fix Ya. Roger

Feb 13, 2010 | 2003 Mitsubishi Galant

1 Answer

How to change front wheel bearings on 2000 mitsubishi galant. i have to change the whole hub assembly?


quite a difficult job without the use of a press but if you can see a circlip either side of hub you can change just bearings but normally you would have to press drive flange out of hub first to see any circlips

Aug 20, 2009 | 2000 Mitsubishi Galant

1 Answer

Mitsubishi Diamante Master Cylinder?


you can go to a salvage yard and find wrecked cars like it even the galant has the same reservior and find the diaphram chances are they won't even charge ypou for it.. good luck please rate this..thanks

Sep 06, 2008 | 2003 Mitsubishi Diamante

1 Answer

Rear wheel bearing


you cant change just the bearing, you have to replace the whole hub assembly. once you take off the wheel, take off the brakes. then remove the bolts for the hub on the back side of the knuckle.

May 27, 2008 | 2001 Mitsubishi Galant

Not finding what you are looking for?
2003 Mitsubishi Galant Logo

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...